Comskip Support Forum

Comskip is a free commercial detector, browse the forum for more information
It is currently Tue Jun 25, 2019 10:27 am

All times are UTC [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: UK Freeview
PostPosted: Mon Jul 18, 2011 1:27 pm 
Offline

Joined: Sun Feb 04, 2007 11:47 am
Posts: 2
I have been using this ini file for several years now. It finds most ads and is usually correct within a few seconds and seems to work for all ITV channels and only occasionally has problems within a program. Its set up for Video Re-do but can easily be changed for other editors. With video Re-do I trim the cuts after using the mouse wheel to locate the frame level cutting points, it takes only a couple of minutes to remove 20 minutes of ads - a good trade off.

Code:
detect_method=111         ;1=black frame, 2=logo, 4=scene change, 8=fuzzy logic, 16=closed captions, 32=aspect ration, 64=silence, 128=cutscenes, 255=all
validate_silence=1         ; Default, set to 0 to force using this clues if selected above.
validate_uniform=1         ; Default, set to 0 to force using this clues (like pure white frames) if blackframe is selected above.
validate_scenechange=1      ; Default, set to 0 to force using this clues if selected above.
verbose=10            ;show a lot of extra info, level 5 is also OK, set to 0 to disable
max_brightness=60               ;frame not black if any pixels checked are greater than this (scale 0 to 255)
test_brightness=40            ;frame not pure black if any pixels checked are greater than this, will check average brightness (scale 0 to 255)
max_avg_brightness=25         ;maximum average brightness for a dim frame to be considered black (scale 0 to 255) 0 means autosetting
max_commercialbreak=600       ;maximum length in seconds to consider a segment a commercial break
min_commercialbreak=25         ;minimum length in seconds to consider a segment a commercial break
max_commercial_size=125         ;maximum time in seconds for a single commercial or multiple commercials if no breaks in between
min_commercial_size=4         ;mimimum time in seconds for a single commercial
min_show_segment_length=125    ; any segment longer than this will be scored towards show.
non_uniformity=500         ; Set to 0 to disable cutpoints based on uniform frames
max_volume=500            ; any frame with sound volume larger than this will not be regarded as black frame
min_silence=12            ; Any deep silence longer than this amount  of frames is a possible cutpoint
ticker_tape=0            ; Amount of pixels from bottom to ignore in all processing
logo_at_bottom=0         ; Set to 1 to search only for logo at the lower half of the video, do not combine with subtitle setting
punish=0               ; Compare to average for sum of 1=brightness, 2=uniform 4=volume, 8=silence, 16=schange, set to 0 to disable
punish_threshold=1.3      ; Multiply when amount is above average * punish_threshold
punish_modifier=2         ; When above average * threshold multiply score by this value
intelligent_brightness=0       ; Set to 1 to use a USA specific algorithm to tune some of the settings, not adviced outside the USA
logo_percentile=0.92         ; if more then this amount of logo is found then logo detection will be disabled
logo_threshold=0.75
punish_no_logo=1         ; Default, set to 0 to avoid show segments without logo to be scored towards commercial
aggressive_logo_rejection=0
connect_blocks_with_logo=1      ; set to 1 if you want successive blocks with logo on the transition to be regarded as connected, set to 0 to disable
logo_filter=0               ; set the size of the filter to apply to bad logo detection, 4 seems to be a good value.
cut_on_ar_change=1         ; set to 1 if you want to cut also on aspect ratio changes when logo is present, set to 2 to force cuts on aspect ratio changes. set to 0 to disable
delete_show_after_last_commercial=0   ; set to 1 if you want to delete the last block if its a show and after a commercial
delete_show_before_or_after_current=0   ; set to 1 if you want to delete the previous and the next show in the recording, this can lead to the deletion of trailers of next show
delete_block_after_commercial=0   ;set to max size of block in seconds to be discarded, set to 0 to disable
remove_before=0            ; amount of seconds of show to be removed before ALL commercials
remove_after=0            ; amount of seconds of show to be removed after ALL commercials
shrink_logo=5            ; Reduce the duration of the logo with this amount of seconds
after_logo=0      ; set to number of seconds after logo disappears comskip should start to search for silence to insert an additional cutpoint
padding=0
ms_audio_delay=5
volume_slip=20
max_repair_size=200         ; Will repair maximum 200 missing MPEG frames in the timeline, set to 0 to disable repairing for players that don't use PTS.
disable_heuristics=4      bit pattern for disabling heuristics, adding 1 disables heristics 1, adding 2 disables heristics 2, adding 4 disables heristics 3, 255  disables all heuristics
delete_logo_file=0         ; set to 1 if you want comskip to tidy up after finishing
output_framearray=0         ; create a big excel file for detailed analysis, set to 0 to disable
output_videoredo=1
output_womble=0
output_mls=0         ; set to 1 if you want MPeg Video Wizard bookmark file output
output_cuttermaran=0
output_mpeg2schnitt=0
output_mpgtx=0
output_dvrcut=0
output_zoomplayer_chapter=0
output_zoomplayer_cutlist=0
output_edl=0
output_edlx=0
output_vcf=0
output_bsplayer=0
output_btv=0            ; set to 1 if you want Beyond TV chapter cutlist output
output_projectx=0         ; set to 1 if you want ProjectX cutlist output (Xcl)
output_avisynth=0
output_vdr=0            ; set to 1 if you want XBMC to skipping commercials
output_demux=0            ; set to 1 if you want comskip to demux the mpeg file while scanning
sage_framenumber_bug=0
sage_minute_bug=0
live_tv=0               ; set to 1 if you use parallelprocessing and need the output while recording
live_tv_retries=4         ; change to 16 when using live_tv in BTV, set to 120 when using on dvr-ms
standoff=0               ; change to 8000000 when using live_tv in BTV
cuttermaran_options="cut=\"true\" unattended=\"true\" muxResult=\"false\" snapToCutPoints=\"true\" closeApp=\"true\""
mpeg2schnitt_options="mpeg2schnitt.exe /S /E /R25  /Z %2 %1"
avisynth_options="LoadPlugin(\"MPEG2Dec3.dll\") \nMPEG2Source(\"%s\")\n"
dvrcut_options="dvrcut \"%s.dvr-ms\" \"%s_clean.dvr-ms\" "
windowtitle="Comskip - %s"


Top
 Profile  
Reply with quote  
 Post subject: Re: UK Freeview
PostPosted: Sat Mar 02, 2013 7:43 pm 
Offline

Joined: Sat Mar 02, 2013 7:37 pm
Posts: 10
Hi devonian,

Thank you for posting this - I have just set up comskip after first playing with SA and found that it has kind of shut down with no support.

So far your .Ini is working fine but very early days.

I notice thism is an old post and wiondered if you still use comskip and if you are still using the samem .ini or if you have a newer one you could share. I shall of course share findings i get also.

Thank you in advance. and thanks to Erik for an excelent product! Qudos to you sir.


Top
 Profile  
Reply with quote  
 Post subject: Re: UK Freeview
PostPosted: Sun Mar 24, 2013 12:31 am 
Offline

Joined: Sun Mar 24, 2013 12:22 am
Posts: 2
I have been playing with comskip settings for the UK, have had mixed success.

I find with the Channel 5 group of channels (5, 5 USA, 5*, 5+1 etc) the default settings here work well. Sometimes not cutting the beginning and end adverts though.

Code:
; See comskip.txt in the distribution zip file for many settable parameters, read manual.html, tuning.html and debugwindow.html for how to tune and debug comskip
detect_method=43         ;1=black frame, 2=logo, 4=scene change, 8=fuzzy logic, 16=closed captions, 32=aspect ration, 64=silence, 128=cutscenes, 255=all
validate_silence=1         ; Default, set to 0 to force using this clues if selected above.
validate_uniform=1         ; Default, set to 0 to force using this clues (like pure white frames) if blackframe is selected above.
validate_scenechange=1      ; Default, set to 0 to force using this clues if selected above.
verbose=10            ;show a lot of extra info, level 5 is also OK, set to 0 to disable
max_brightness=60               ;frame not black if any pixels checked are greater than this (scale 0 to 255)
test_brightness=40            ;frame not pure black if any pixels checked are greater than this, will check average brightness (scale 0 to 255)
max_avg_brightness=25         ;maximum average brightness for a dim frame to be considered black (scale 0 to 255) 0 means autosetting
max_commercialbreak=600       ;maximum length in seconds to consider a segment a commercial break
min_commercialbreak=25         ;minimum length in seconds to consider a segment a commercial break
max_commercial_size=125         ;maximum time in seconds for a single commercial or multiple commercials if no breaks in between
min_commercial_size=4         ;mimimum time in seconds for a single commercial
min_show_segment_length=250    ; any segment longer than this will be scored towards show.
non_uniformity=500         ; Set to 0 to disable cutpoints based on uniform frames
max_volume=500            ; any frame with sound volume larger than this will not be regarded as black frame
min_silence=12            ; Any deep silence longer than this amount  of frames is a possible cutpoint
ticker_tape=0            ; Amount of pixels from bottom to ignore in all processing
logo_at_bottom=0         ; Set to 1 to search only for logo at the lower half of the video, do not combine with subtitle setting
punish=0               ; Compare to average for sum of 1=brightness, 2=uniform 4=volume, 8=silence, 16=schange, set to 0 to disable
punish_threshold=1.3      ; Multiply when amount is above average * punish_threshold
punish_modifier=2         ; When above average * threshold multiply score by this value
intelligent_brightness=0       ; Set to 1 to use a USA specific algorithm to tune some of the settings, not adviced outside the USA
logo_percentile=0.92         ; if more then this amount of logo is found then logo detection will be disabled
logo_threshold=0.75
punish_no_logo=1         ; Default, set to 0 to avoid show segments without logo to be scored towards commercial
aggressive_logo_rejection=0
connect_blocks_with_logo=1      ; set to 1 if you want successive blocks with logo on the transition to be regarded as connected, set to 0 to disable
logo_filter=0               ; set the size of the filter to apply to bad logo detection, 4 seems to be a good value.
cut_on_ar_change=1         ; set to 1 if you want to cut also on aspect ratio changes when logo is present, set to 2 to force cuts on aspect ratio changes. set to 0 to disable
delete_show_after_last_commercial=1   ; set to 1 if you want to delete the last block if its a show and after a commercial
delete_show_before_or_after_current=1   ; set to 1 if you want to delete the previous and the next show in the recording, this can lead to the deletion of trailers of next show
delete_block_after_commercial=0   ;set to max size of block in seconds to be discarded, set to 0 to disable
remove_before=0            ; amount of seconds of show to be removed before ALL commercials
remove_after=0            ; amount of seconds of show to be removed after ALL commercials
shrink_logo=5            ; Reduce the duration of the logo with this amount of seconds
after_logo=0      ; set to number of seconds after logo disappears comskip should start to search for silence to insert an additional cutpoint
padding=5
ms_audio_delay=5
volume_slip=40
skip_b_frames=0            ; Set to 1 to force Comskip to skip frames for higher processing speed.
max_repair_size=200         ; Will repair maximum 200 missing MPEG frames in the timeline, set to 0 to disable repairing for players that don't use PTS.
disable_heuristics=4      bit pattern for disabling heuristics, adding 1 disables heristics 1, adding 2 disables heristics 2, adding 4 disables heristics 3, 255  disables all heuristics
delete_logo_file=0         ; set to 1 if you want comskip to tidy up after finishing
output_framearray=0         ; create a big excel file for detailed analysis, set to 0 to disable
output_data=0            ; create a dump of the user data channel, used for CC and XDS (such as V-Chip info). Can be use together with output_framearray to remote debug CC decoding
output_videoredo=0
output_womble=0
output_mls=0         ; set to 1 if you want MPeg Video Wizard bookmark file output
output_cuttermaran=0
output_mpeg2schnitt=0
output_mpgtx=0
output_dvrcut=0
output_zoomplayer_chapter=0
output_zoomplayer_cutlist=0
output_edl=1
output_dvrmstb=0         ; Set to 1 if you're running DVRMS-Toolbox
output_edlx=0
output_vcf=0
output_bsplayer=0
output_btv=0            ; set to 1 if you want Beyond TV chapter cutlist output
output_projectx=0         ; set to 1 if you want ProjectX cutlist output (Xcl)
output_avisynth=0
output_vdr=0            ; set to 1 if you want XBMC to skipping commercials
output_demux=0            ; set to 1 if you want comskip to demux the mpeg file while scanning
sage_framenumber_bug=0
sage_minute_bug=0
live_tv=0               ; set to 1 if you use parallelprocessing and need the output while recording
live_tv_retries=4         ; change to 16 when using live_tv in BTV, used for mpeg PS and TS
dvrms_live_tv_retries=300         ; only used for dvr_ms
standoff=0               ; change to 8000000 when using live_tv in BTV
cuttermaran_options="cut=\"true\" unattended=\"true\" muxResult=\"false\" snapToCutPoints=\"true\" closeApp=\"true\""
mpeg2schnitt_options="mpeg2schnitt.exe /S /E /R25  /Z %2 %1"
avisynth_options="LoadPlugin(\"MPEG2Dec3.dll\") \nMPEG2Source(\"%s\")\n"
dvrcut_options="dvrcut \"%s.dvr-ms\" \"%s_clean.dvr-ms\" "
windowtitle="Comskip - %s"


I am really struggling with the Channel 4 group. I think because they don't fade to a black screen unlike channel 5 does. I tried using the settings mentioned here (I had to alter for MCEBuddy to work with them). The settings don't work very well, but do work better than the default config. I was hoping maybe getting some help tuning them.
With these settings, comercials are sometimes detected, but it cuts back in to them short (I guess its detecting some commercials as the show). Like the one I use for Channel 5 above, the begining and end adverts/programs are not cut.

Code:
; See comskip.txt in the distribution zip file for many settable parameters, read manual.html, tuning.html and debugwindow.html for how to tune and debug comskip
detect_method=43         ;1=uniform (black or any other color) frame, 2=logo, 4=scene change, 8=resolution change, 16=closed captions, 32=aspect ration, 64=silence, 128=cutscenes, 255=all
max_brightness=60               ;frame not black if any pixels checked are greater than this (scale 0 to 255)
maxbright=1 (1 - MAXINT)
;Amount of pixels in a black frame allowed to be brighter then max_brightness
test_brightness=40            ;frame not pure black if any pixels checked are greater than this, will check average brightness (scale 0 to 255)
max_avg_brightness=25         ;maximum average brightness for a dim frame to be considered black (scale 0 to 255) 0 means autosetting
max_commercialbreak=600       ;maximum length in seconds to consider a segment a commercial break
min_commercialbreak=25         ;minimum length in seconds to consider a segment a commercial break
max_commercial_size=125         ;maximum time in seconds for a single commercial or multiple commercials if no breaks in between
min_commercial_size=4         ;mimimum time in seconds for a single commercial
min_show_segment_length=125    ; any segment longer than this will be scored towards show.
;Any block larger then this in seconds is regarded as a show block
non_uniformity=500
; Set to 0 to disable cutpoints based on uniform frames
max_volume=500         ; any frame with sound volume larger than this will not be regarded as black frame
min_silence=12            ; Any deep silence longer than this amount  of frames is a possible cutpoint
validate_silence=1         ; Default, set to 0 to force using this clues if selected above.
validate_uniform=1         ; Default, set to 0 to force using this clues (like pure white frames) if blackframe is selected above.
validate_scenechange=1      ; Default, set to 0 to force using this clues if selected above.
verbose=10            ;show a lot of extra info, level 5 is also OK, set to 0 to disable
max_brightness=1               ;frame not black if any pixels checked are greater than this (scale 0 to 255)
test_brightness=40            ;frame not pure black if any pixels checked are greater than this, will check average brightness (scale 0 to 255)
max_avg_brightness=25         ;maximum average brightness for a dim frame to be considered black (scale 0 to 255) 0 means autosetting
max_commercialbreak=600       ;maximum length in seconds to consider a segment a commercial break
min_commercialbreak=25         ;minimum length in seconds to consider a segment a commercial break
max_commercial_size=125         ;maximum time in seconds for a single commercial or multiple commercials if no breaks in between
min_commercial_size=4         ;mimimum time in seconds for a single commercial
min_show_segment_length=250    ; any segment longer than this will be scored towards show.
min_show_segment_length=125
non_uniformity=500         ; Set to 0 to disable cutpoints based on uniform frames
max_volume=500            ; any frame with sound volume larger than this will not be regarded as black frame
; Any deep silence longer than this amount  of frames is a possible cutpoint
ticker_tape=0
; Amount of pixels from bottom to ignore in all processing
logo_at_bottom=0         ; Set to 1 to search only for logo at the lower half of the video, do not combine with subtitle setting
punish=0
;Compare to average for sum of 1=brightness, 2=uniform 4=volume, 8=silence, 16=schange, set to 0 to disable
punish_threshold=1.3      ; Multiply when amount is above average * punish_threshold
punish_modifier=2         ; When above average * threshold multiply score by this value
intelligent_brightness=0       ; Set to 1 to use a USA specific algorithm to tune some of the settings, not adviced outside the USA
logo_percentile=0.92         ; if more then this amount of logo is found then logo detection will be disabled
logo_threshold=0.75
punish_no_logo=1
; Default, set to 0 to avoid show segments without logo to be scored towards commercial
aggressive_logo_rejection=0
connect_blocks_with_logo=1      ; set to 1 if you want successive blocks with logo on the transition to be regarded as connected, set to 0 to disable
logo_filter=0               ; set the size of the filter to apply to bad logo detection, 4 seems to be a good value.
cut_on_ar_change=1         ; set to 1 if you want to cut also on aspect ratio changes when logo is present, set to 2 to force cuts on aspect ratio changes. set to 0 to disable
delete_show_after_last_commercial=1   ; set to 1 if you want to delete the last block if its a show and after a commercial
delete_show_before_or_after_current=1   ; set to 1 if you want to delete the previous and the next show in the recording, this can lead to the deletion of trailers of next show
delete_block_after_commercial=0   ;set to max size of block in seconds to be discarded, set to 0 to disable
remove_before=0         ; amount of seconds of show to be removed before ALL commercials
remove_after=0            ; amount of seconds of show to be removed after ALL commercials
shrink_logo=5            ; Reduce the duration of the logo with this amount of seconds
after_logo=0      ; set to number of seconds after logo disappears comskip should start to search for silence to insert an additional cutpoint
padding=5
ms_audio_delay=5
volume_slip=40
skip_b_frames=0            ; Set to 1 to force Comskip to skip frames for higher processing speed.
max_repair_size=200         ; Will repair maximum 200 missing MPEG frames in the timeline, set to 0 to disable repairing for players that don't use PTS.
disable_heuristics=4      bit pattern for disabling heuristics, adding 1 disables heristics 1, adding 2 disables heristics 2, adding 4 disables heristics 3, 255  disables all heuristics
delete_logo_file=0         ; set to 1 if you want comskip to tidy up after finishing
output_framearray=0         ; create a big excel file for detailed analysis, set to 0 to disable
output_data=0            ; create a dump of the user data channel, used for CC and XDS (such as V-Chip info). Can be use together with output_framearray to remote debug CC decoding
output_videoredo=0
output_womble=0
output_mls=0         ; set to 1 if you want MPeg Video Wizard bookmark file output
output_cuttermaran=0
output_mpeg2schnitt=0
output_mpgtx=0
output_dvrcut=0
output_zoomplayer_chapter=0
output_zoomplayer_cutlist=0
output_edl=1
output_dvrmstb=0         ; Set to 1 if you're running DVRMS-Toolbox
output_edlx=0
output_vcf=0
output_bsplayer=0
output_btv=0            ; set to 1 if you want Beyond TV chapter cutlist output
output_projectx=0         ; set to 1 if you want ProjectX cutlist output (Xcl)
output_avisynth=0
output_vdr=0            ; set to 1 if you want XBMC to skipping commercials
output_demux=0            ; set to 1 if you want comskip to demux the mpeg file while scanning
sage_framenumber_bug=0
sage_minute_bug=0
live_tv=0               ; set to 1 if you use parallelprocessing and need the output while recording
live_tv_retries=4         ; change to 16 when using live_tv in BTV, used for mpeg PS and TS
dvrms_live_tv_retries=300         ; only used for dvr_ms
standoff=0               ; change to 8000000 when using live_tv in BTV
cuttermaran_options="cut=\"true\" unattended=\"true\" muxResult=\"false\" snapToCutPoints=\"true\" closeApp=\"true\""
mpeg2schnitt_options="mpeg2schnitt.exe /S /E /R25  /Z %2 %1"
avisynth_options="LoadPlugin(\"MPEG2Dec3.dll\") \nMPEG2Source(\"%s\")\n"
dvrcut_options="dvrcut \"%s.dvr-ms\" \"%s_clean.dvr-ms\" "
windowtitle="Comskip - %s"


Generally it seems to be a big annoyance to tune comskip in the UK compared to US. I am not sure how it would be possible to get a working config even for each channel, because often programs have different sponsors (seen after certain shows) and even if you get a setting working for one particular channel (for instance pink banners with E4), it won't work again after the channel decides to change its channel animation.

What method do you think is best to work on for the UK?


Top
 Profile  
Reply with quote  
 Post subject: Re: UK Freeview
PostPosted: Sun Mar 24, 2013 8:48 am 
Offline
Site Admin

Joined: Sun Aug 21, 2005 3:49 pm
Posts: 3270
You should probably use detection method 111 to start with
If that does not improve follow the "how to ask for help" post


Top
 Profile  
Reply with quote  
 Post subject: Re: UK Freeview
PostPosted: Wed Mar 27, 2013 6:37 pm 
Offline

Joined: Sun Mar 24, 2013 12:22 am
Posts: 2
Thanks for that! Now works a treat on channel 4 and 5 group of channels.

The only problem I now have is the following:

Code:
delete_show_after_last_commercial=1   ; set to 1 if you want to delete the last block if its a show and after a commercial
delete_show_before_or_after_current=1   ; set to 1 if you want to delete the previous and the next show in the recording, this can lead to the deletion of trailers of next show


The beginning of the show seems to cut great, but there is always part of the show that is not deleted afterwards. Not very long, but still part of it.

Thanks!


Top
 Profile  
Reply with quote  
 Post subject: Re: UK Freeview
PostPosted: Tue Dec 18, 2018 10:43 pm 
Offline

Joined: Tue Dec 18, 2018 10:35 pm
Posts: 2
I know this post is incredibly old but I am use Plex Comskip and wondered if anyone has come up with a better comskip.ini for Freeview UK since the ones above?

thanks


Top
 Profile  
Reply with quote  
 Post subject: Re: UK Freeview
PostPosted: Wed Dec 19, 2018 8:22 am 
Offline
Site Admin

Joined: Sun Aug 21, 2005 3:49 pm
Posts: 3270
Feel free to follow "how to ask for help" if you want some tuning support


Top
 Profile  
Reply with quote  
 Post subject: Re: UK Freeview
PostPosted: Wed Dec 19, 2018 1:42 pm 
Offline

Joined: Tue Dec 18, 2018 10:35 pm
Posts: 2
erik wrote:
Feel free to follow "how to ask for help" if you want some tuning support


Thank you


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group