Code: Select all
; Last modified: 6:50 AM 6/5/2006 ; comskip v0.79.44 ; detect_method=255 ;1=black frame, 2=logo, 4=scene change, 8=fuzzy logic, 16=closed captions, 32=aspect ration, 64=silence, 255=all validate_silence=1 ; Default, set to 0 to force using this clues if selected above. validate_uniform=1 ; Default, set to 0 to force using this clues (like pure white frames) if blackframe is selected above. validate_scenechange=1 ; Default, set to 0 to force using this clues if selected above. play_nice_start=0800 ;at what time of the day should comskip slow itself down play_nice_end=0200 ;ending time for self slowing verbose=10 ;show a lot of extra info, level 5 is also OK, set to 0 to disable fps=29.97 ;frames per second (NTSC=29.970, PAL=25) border=10 ;border around edge of video to ignore ccCheck=1 max_brightness=60 ;frame not black if any pixels checked are greater than this (scale 0 to 255) test_brightness=40 ;frame not pure black if any pixels checked are greater than this, will check average brightness (scale 0 to 255) max_avg_brightness=20 ;maximum average brightness for a dim frame to be considered black (scale 0 to 255) 0 means autosetting max_commercialbreak=305 ;maximum length in seconds to consider a segment a commercial break min_commercialbreak=10 ;minimum length in seconds to consider a segment a commercial break max_commercial_size=65 ;maximum time in seconds for a single commercial or multiple commercials if no breaks in between min_commercial_size=14 ;mimimum time in seconds for a single commercial min_show_segment_length=291 ; any segment longer than this will be scored towards show. non_uniformity=250 max_volume=0 ; any frame with sound volume larger than this will not be regarded as black frame min_silence=20 ; Any deep silence longer than this amount of frames is a possible cutpoint min_black_frames_for_break=1; ticker_tape=0 ; Amount of pixels from bottom to ignore in all processing punish=0 ; Compare to average for sum of 1=brightness, 2=uniform 4=volume, 8=silence, 16=schange, set to 0 to disable punish_threshold=1.3 ; Multiply when amount is above average * punish_threshold punish_modifier=2 ; When above average * threshold multiply score by this value intelligent_brightness=1 ; Set to 1 to use a USA specific algorithm to tune some of the settings, not adviced outside the USA logo_percentile=0.92 ; if more then this amount of logo is found then logo detection will be disabled logo_threshold=0.70 punish_no_logo=1 ; Default, set to 0 to avoid show segments without logo to be scored towards commercial aggressive_logo_rejection=1 connect_blocks_with_logo=1 ; set to 1 if you want successive blocks with logo on the transition to be regarded as connected, set to 0 to disable cut_on_ar_change=1 ; set to 1 if you want to cut also on aspect ratio changes, set to 0 to disable delete_show_after_last_commercial=0 ; set to 1 if you want to delete the last block if its a show and after a commercial delete_show_before_or_after_current=0 ; set to 1 if you want to delete the previous and the next show in the recording, this can lead to the deletion of trailers of next show shrink_logo=5 ; Reduce the duration of the logo with this amount of seconds after_logo=0 ; set to number of seconds after logo disappears comskip should start to search for silence to insert an additional cutpoint padding=0 ms_audio_delay=5 max_repair_size=40 ; Will repair maximum 40 missing MPEG frames in the timeline, set to 0 to disable. delete_logo_file=1 ; set to 1 if you want comskip to tidy up after finishing output_framearray=1 ; create a big excel file for detailed analysis, set to 0 to disable output_videoredo=0 output_womble=0 output_mls=0 ; set to 1 if you want MPeg Video Wizard bookmark file output output_cuttermaran=0 output_mpeg2schnitt=0 output_mpgtx=0 output_dvrcut=0 output_zoomplayer_chapter=0 output_zoomplayer_cutlist=0 output_edl=0 output_edlx=0 output_vcf=0 output_btv=0 ; set to 1 if you want Beyond TV chapter cutlist output output_projectx=0 ; set to 1 if you want ProjectX cutlist output (Xcl) output_demux=0 ; set to 1 if you want comskip to demux the mpeg file while scanning output_default=1 ; output the default .txt file output_debugwindow=0 sage_framenumber_bug=0 sage_minute_bug=0 live_tv=0 ; set to 1 if you use parallelprocessing and need the output while recording excessive_length_modifier=0.01 cuttermaran_options="cut=\"true\" unattended=\"true\" muxResult=\"false\" snapToCutPoints=\"true\" closeApp=\"true\"" mpeg2schnitt_options="mpeg2schnitt.exe /S /E /R25 /Z %2 %1" dvrcut_options="dvrcut \"%s.dvr-ms\" \"%s_clean.dvr-ms\" "