In Australia the shows generally have strong steady logos with none in commercials, making for fairly accurate detection.
My 'cut out points' are perfect but 'cut ins' show about 1 second of each commercial detected.
Does 'remove_before=1' reset the 'cut in point' back one second for each detected commercial?
Getting about 1 sec of each commercial after detection
-
- Posts: 3
- Joined: Sat Jun 17, 2006 12:35 pm
-
- Posts: 3
- Joined: Sat Jun 17, 2006 12:35 pm
-
- Posts: 3
- Joined: Sat Jun 17, 2006 12:35 pm
Yehaa!
Perfect detection and cutting. I think my mistake was leaving the 'shrink_logo=10' setting during my attempts to fix the com artifact. I can confirm that 'remove_before' works a treat for at least one of my Aussie shows. I will play with some other feeds and see what I can produce then will place an Aussie.ini on the Forum (its not much different to the default so you have got it close to right for us Aussie users).
Thanks for a great prog and your quick responses to me and other users.
Perfect detection and cutting. I think my mistake was leaving the 'shrink_logo=10' setting during my attempts to fix the com artifact. I can confirm that 'remove_before' works a treat for at least one of my Aussie shows. I will play with some other feeds and see what I can produce then will place an Aussie.ini on the Forum (its not much different to the default so you have got it close to right for us Aussie users).
Thanks for a great prog and your quick responses to me and other users.