Page 1 of 1
Getting about 1 sec of each commercial after detection
Posted: Tue Jul 11, 2006 6:05 am
by stantheman
In Australia the shows generally have strong steady logos with none in commercials, making for fairly accurate detection.
My 'cut out points' are perfect but 'cut ins' show about 1 second of each commercial detected.
Does 'remove_before=1' reset the 'cut in point' back one second for each detected commercial?
Posted: Tue Jul 11, 2006 6:36 am
by erik
If you use 0.79.47 then its because of a bug, download the latest build 0.48
Posted: Tue Jul 11, 2006 6:51 am
by stantheman
Thanks for quick reply erik. I am using build .48 but option does not seem to make any difference. I will try an amout greater than 1 to see if it in fact changes the cut points. Will report back.
Posted: Tue Jul 11, 2006 7:17 am
by erik
remove_before is for removing before the commercial
remove_after is for removing after the commercial.
Posted: Tue Jul 11, 2006 8:37 am
by stantheman
Yehaa!
Perfect detection and cutting. I think my mistake was leaving the 'shrink_logo=10' setting during my attempts to fix the com artifact. I can confirm that 'remove_before' works a treat for at least one of my Aussie shows. I will play with some other feeds and see what I can produce then will place an Aussie.ini on the Forum (its not much different to the default so you have got it close to right for us Aussie users).
Thanks for a great prog and your quick responses to me and other users.