Comskip Support Forum

Comskip is a free commercial detector, browse the forum for more information
It is currently Wed Nov 14, 2018 1:56 pm

All times are UTC [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Tue Nov 15, 2016 2:04 pm 
Offline

Joined: Tue Sep 13, 2016 2:17 am
Posts: 19
Using the most recent comskip suggested, it seems like it cuts off part of The Simpsons a couple minutes in

Code:
; See comskip.txt in the distribution zip file for many settable parameters, read      manual.html, tuning.html and debugwindow.html for how to tune and debug comskip
detect_method=107 ; 1=black frame, 2=logo, 4=scene change, 8=fuzzy logic, 16=clos     ed captions, 32=aspect ration, 64=silence, 128=cutscenes, 255=all
validate_silence=1 ; Default, set to 0 to force using this clues if selected abov     e.
validate_uniform=1 ; Default, set to 0 to force using this clues (like pure white      frames) if blackframe is selected above.
validate_scenechange=1 ; Default, set to 0 to force using this clues if selected      above.
verbose=0 ; Show a lot of extra info, level 5 is also OK, set to 0 to disable
max_brightness=60 ; Frame not black if any pixels checked are greater than this (     scale 0 to 255)
test_brightness=40 ; Frame not pure black if any pixels checked are greater than      this, will check average brightness (scale 0 to 255)
max_avg_brightness=25 ; Maximum average brightness for a dim frame to be consider     ed black (scale 0 to 255) 0 means autosetting
max_commercialbreak=600 ; Maximum length in seconds to consider a segment a comme     rcial break
min_commercialbreak=4 ; Minimum length in seconds to consider a segment a commerc     ial break
max_commercial_size=140 ; Maximum time in seconds for a single commercial or mult     iple commercials if no breaks in between
min_commercial_size=4 ; Mimimum time in seconds for a single commercial
min_show_segment_length=250 ; Any segment longer than this will be scored towards      show.
non_uniformity=500 ; Set to 0 to disable cutpoints based on uniform frames
max_volume=500 ; Any frame with sound volume larger than this will not be regarde     d as black frame
max_silence=100 ;
min_silence=12 ; Any deep silence longer than this amount of frames is a possible      cutpoint
ticker_tape=0 ; Amount of pixels from bottom to ignore in all processing
logo_at_bottom=0 ; Set to 1 to search only for logo at the lower half of the vide     o, do not combine with subtitle setting
use_existing_logo_file=1 ; Use logo file already created at beginning of show, de     fault 0
punish=1 ; Compare to average for sum of 1=brightness, 2=uniform 4=volume, 8=sile     nce, 16=schange, set to 0 to disable
punish_threshold=1.3 ; Multiply when amount is above average * punish_threshold
punish_modifier=4 ; When above average * threshold multiply score by this value
intelligent_brightness=0 ; Set to 1 to use a USA specific algorithm to tune some      of the settings, not adviced outside the USA
logo_percentile=0.92 ; If more then this amount of logo is found then logo detect     ion will be disabled
logo_threshold=0.80 ; Digital signals can be higher
min_black_frames_for_break=1 ;
punish_no_logo=1 ; Default, set to 0 to avoid show segments without logo to be sc     ored towards commercial
aggressive_logo_rejection=0
connect_blocks_with_logo=1 ; Set to 1 if you want successive blocks with logo on      the transition to be regarded as connected, set to 0 to disable
delay_logo_search=0 ;
logo_filter=1 ; Set the size of the filter to apply to bad logo detection, 4 seem     s to be a good value.
edge_step=2 ; New, default 1
cut_on_ar_change=1 ; Set to 1 if you want to cut also on aspect ratio changes whe     n logo is present, set to 2 to force cuts on aspect ratio changes. set to 0 to di     sable
delete_show_after_last_commercial=0 ; Set to 1 if you want to delete the last blo     ck if its a show and after a commercial
delete_show_before_first_commercial=0 ; New, default 0
delete_show_before_or_after_current=0 ; Set to 1 if you want to delete the previo     us and the next show in the recording, this can lead to the deletion of trailers      of next show
delete_block_after_commercial=0 ; Set to max size of block in seconds to be disca     rded, set to 0 to disable
remove_before=0 ; Amount of seconds of show to be removed before ALL commercials
remove_after=0 ; Amount of seconds of show to be removed after ALL commercials
shrink_logo=5 ; Reduce the duration of the logo with this amount of seconds
after_logo=0 ; Set to number of seconds after logo disappears comskip should star     t to search for silence to insert an additional cutpoint
padding=0.50
ms_audio_delay=5
volume_slip=40
skip_b_frames=0 ; Set to 1 to force Comskip to skip frames for higher processing      speed.
hardware_decode=0 ; Set to 1 to enable hardware accelerated video decoding, only      available in donator version
thread_count=4 ; Set to utilize Quad Core
max_repair_size=200 ; Will repair maximum 200 missing MPEG frames in the timeline     , set to 0 to disable repairing for players that don't use PTS.
disable_heuristics=4 ; Bit pattern for disabling heuristics, adding 1 disables he     ristics 1, adding 2 disables heristics 2, adding 4 disables heristics 3, 255 disa     bles all heuristics
delete_logo_file=1 ; Set to 1 if you want comskip to tidy up after finishing
output_framearray=0 ; Create a big excel file for detailed analysis, set to 0 to      disable
output_data=0 ; Create a dump of the user data channel, used for CC and XDS (such      as V-Chip info). Can be use together with output_framearray to remote debug CC d     ecoding
output_videoredo=0 ; The old videoredo format
output_videoredo3=0 ; The new videoredo v3 format.
output_womble=0
output_mls=0 ; Set to 1 if you want MPeg Video Wizard bookmark file output
output_cuttermaran=0
output_mpeg2schnitt=0
output_mpgtx=0
output_dvrcut=0
output_zoomplayer_chapter=0
output_zoomplayer_cutlist=0
output_edl=1
output_dvrmstb=0 ; Set to 1 if you're running DVRMS-Toolbox
output_edlx=0
output_vcf=0
output_bsplayer=0
output_btv=0 ; Set to 1 if you want Beyond TV chapter cutlist output
output_projectx=0 ; Set to 1 if you want ProjectX cutlist output (Xcl)
output_avisynth=0
output_vdr=0 ; Set to 1 if you want XBMC to skipping commercials
output_demux=0 ; Set to 1 if you want comskip to demux the mpeg file while scanni     ng
sage_framenumber_bug=0
sage_minute_bug=0
live_tv=1 ; Set to 1 if you use parallelprocessing and need the output while reco     rding
live_tv_retries=4 ; Change to 16 when using live_tv in BTV, used for mpeg PS and      TS
dvrms_live_tv_retries=300 ; Only used for dvr_ms
standoff=0 ; Change to 8000000 when using live_tv in BTV
cuttermaran_options="cut=\"true\" unattended=\"true\" muxResult=\"false\" snapToC     utPoints=\"true\" closeApp=\"true\""
mpeg2schnitt_options="mpeg2schnitt.exe /S /E /R25 /Z %2 %1"
avisynth_options="LoadPlugin(\"MPEG2Dec3.dll\") \nMPEG2Source(\"%s\")\n"
dvrcut_options="dvrcut \"%s.dvr-ms\" \"%s_clean.dvr-ms\" "
windowtitle="Comskip - %s"
always_keep_first_seconds=200
always_keep_last_seconds=60
global_threshold=1.79


Top
 Profile  
Reply with quote  
PostPosted: Wed Nov 16, 2016 8:15 am 
Offline
Site Admin

Joined: Sun Aug 21, 2005 3:49 pm
Posts: 3211
You nee to provide more info
Follow the "how to ask for help" post


Top
 Profile  
Reply with quote  
PostPosted: Wed Nov 16, 2016 11:02 am 
Offline

Joined: Tue Sep 13, 2016 2:17 am
Posts: 19
Apologies. I have to rerun the script to get exact missing times. I have the original file,
But it is quite large. 2.8 GB. The Simpsons (1989) - S28E07 - Havana Wild Weekend

I can probably Dropbox it over. I'll rerun it for the exact times of the missing piece.


205.44 255.41 0
339.51 535.35 0
668.33 688.32 0
1093.44 1316.02 0
1609.69 1739.54 0
File end time: 1800.382000


Top
 Profile  
Reply with quote  
PostPosted: Wed Nov 16, 2016 12:00 pm 
Offline
Site Admin

Joined: Sun Aug 21, 2005 3:49 pm
Posts: 3211
No need for original file to be send, follow the "how to ask for help" post and send only files specified


Top
 Profile  
Reply with quote  
PostPosted: Wed Nov 16, 2016 5:42 pm 
Offline

Joined: Tue Sep 13, 2016 2:17 am
Posts: 19
I have the files, I just need to edit the ref. Unfortunately, it is in frames, whereas I saw seconds. So I'm not quite sure what to do there.
It cuts content at opening after the credits as well as a few other minutes in the beginning


Top
 Profile  
Reply with quote  
PostPosted: Wed Nov 16, 2016 6:00 pm 
Offline
Site Admin

Joined: Sun Aug 21, 2005 3:49 pm
Posts: 3211
Multiply seconds with frames per second


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group