init file for the netherlands

To discuss the tuning of comskip and for posting your ini files
Post Reply
sen5243
Posts: 4
Joined: Wed Sep 27, 2006 1:24 pm

init file for the netherlands

Post by sen5243 »

Hi Erik,

I also live in the Netherlands, is it possible for you to post your init file here?

Cheers Richard
erik
Site Admin
Posts: 3370
Joined: Sun Aug 21, 2005 3:49 pm

Re: init file for the netherlands

Post by erik »

This ini file works for the Netherlands, all channels except BBC (because there is no logo)
and Discovery (always a logo)
YOu can make it more agressive by setting
detect_method=111

Code: Select all

detect_method=47	;1=black frame, 2=logo, 4=scene change, 8=fuzzy logic, 16=closed captions, 32=aspect ration, 255=all
verbose=0		;show a lot of extra info, level 5 is also OK, set to 0 to disable
ticker_tape=0
max_brightness=60      ;frame not black if any pixels checked are greater than this (scale 0 to 255)
test_brightness=40      ;frame not pure black if any pixels checked are greater than this, will check average brightness (scale 0 to 255)
max_avg_brightness=20	;maximum average brightness for a dim frame to be considered black (scale 0 to 255) 0 means autosetting
max_commercialbreak=600 ;maximum length in seconds to consider a segment a commercial break
min_commercialbreak=30	;minimum length in seconds to consider a segment a commercial break
max_commercial_size=150	;maximum time in seconds for a single commercial or multiple commercials if no breaks in between
min_commercial_size=4   ;mimimum time in seconds for a single commercial
min_show_segment_length=120; any segment longer than this will be scored towards show.
non_uniformity=500
max_volume=250	; any frame with sound volume larger than this will not be regarded as black frame
intelligent_brightness=0 ; 
delete_logo_file=0	; set to 1 if you want comskip to tidy up after finishing
give_up_logo_search=2000 
output_framearray=1	; create a big excel file for detailed analysis, set to 0 to disable
connect_blocks_with_logo=1	; set to 1 if you want successive blocks with logo on the transition to be regarded as connected, set to 0 to disable
logo_percentile=0.92	; if more then this amount of logo is found then logo detection will be disabled
logo_threshold=0.70
aggressive_logo_rejection=0
cut_on_ar_change=1	; set to 1 if you want to cut also on aspect ratio changes, set to 0 to disable
delete_show_before_or_after_current=1
delete_show_after_last_commercial=1; delete the last block if its a show and after a commercial
shrink_logo=5	; Reduce the duration of the logo with this amount of seconds
output_videoredo=0
output_cuttermaran=0
output_womble=0
output_mpgtx=0
output_training=0
output_edl=0
output_zoomplayer_chapter=0
output_zoomplayer_cutlist=0
padding=0
live_tv=0
edge_level_threshold=5
edge_radius = 2
excessive_length_modifier=0.1
ar_wrong_modifier=10.0
sen5243
Posts: 4
Joined: Wed Sep 27, 2006 1:24 pm

Re: init file for the netherlands

Post by sen5243 »

super!!!!
Post Reply