A quick question: log file abbreviation meanings

To discuss the tuning of comskip and for posting your ini files
Post Reply
res_au
Posts: 1
Joined: Thu Jul 03, 2008 3:25 am

A quick question: log file abbreviation meanings

Post by res_au »

Hi,
I've had a search through the forum and the files from the zip, but I can't find out what a certain abbreviation means. In the bottom of the log at "block list after weighing" what does the AELCN mean? N most importantly (its after Aspect ratio, and before cut).

The reason I ask, is because it's been jumping part way into the show, and I was looking at why, and if I can get it to take anything with 'N' (from above) in it as show, then it would work.

If you're interested, here's the lines:

Code: Select all

Block list after weighing
----------------------------------------------------
  #     sbf  bs  be     fs     fe    sc      len   scr cmb   ar                   cut bri  logo   vol  sil corr stdev        cc
 36:--    5   5   0  23166  23289   5.27    4.920  0.65   3 0.93            LCN    a    1056+ 0.00  471+ 17+  0.000   105 NONE      
 37:++    1   1   0  23290  25818   0.01  101.120  0.09   0 0.93            L      a     431- 0.89   59-  2-  0.000    43 NONE      
 38:++    1   1   0  25819  25976   0.00    6.280  0.04   0 1.26  6     { A L      a     297- 0.00    0-  0-  0.000    29 NONE      
 39:++    9   1   8  25977  30203   0.00  169.040  0.07   0 0.93           EL      a b   306- 0.83    0-  0-  0.000    30 NONE      

 64:--    5   5   0  45017  45152   3.00    5.400  0.51   0 0.93            L N    a    1205+ 0.00    0-  0-  0.000   120 NONE      
 65:++    1   1   1  45153  52728   0.00  303.000  0.09   0 0.93           EL        b   426- 0.97   17-  0-  0.000    42 NONE
erik
Site Admin
Posts: 3368
Joined: Sun Aug 21, 2005 3:49 pm

Re: A quick question: log file abbreviation meanings

Post by erik »

The upper case letters identify what modifiers are used.

When verbose is set to 10 you will find above the block list the actual scoring being done.
Here you can see in detail how the modifiers are applied.

The meaning of the letters
A: Aspect ratio difference.
E: Excessive length
L: Logo present of absent
C: Combining some blocks resulted in strict or non strict commercial
S: Strict commercial
N: Non strict commercial.
Post Reply