Tweak for Canada
Posted: Mon Mar 13, 2006 6:57 pm
Seems to work pretty good so far with comskip79_28.exe, its only been tested on about 12 shows...but it has been 100% in cutting commercials out and the junk after the end of the show
fps=29.97 ;NTSC=29.97 PAL=25
detect_method=255 ;47 ;1=black frame, 2=logo, 4=scene change, 8=fuzzy logic, 16=closed captions, 32=aspect ration, 255=all
verbose=10 ;10 ;show a lot of extra info, level 5 is also OK, set to 0 to disable
max_brightness=60 ;frame not black if any pixels checked are greater than this (scale 0 to 255)
test_brightness=40 ;frame not pure black if any pixels checked are greater than this, will check average brightness (scale 0 to 255)
max_avg_brightness=0 ;maximum average brightness for a dim frame to be considered black (scale 0 to 255) 0 means autosetting
max_commercialbreak=290 ;600 ;maximum length in seconds to consider a segment a commercial break
min_commercialbreak=10 ;minimum length in seconds to consider a segment a commercial break
max_commercial_size=61 ;120 ;maximum time in seconds for a single commercial or multiple commercials if no breaks in between
min_commercial_size=14 ;4 ;mimimum time in seconds for a single commercial
min_show_segment_length=260 ;60 ; any segment longer than this will be scored towards show.
non_uniformity=250
max_volume=0 ;500 ; any frame with sound volume larger than this will not be regarded as black frame
ticker_tape=0 ; Amount of pixels from bottom to ignore in all processing
intelligent_brightness=1 ;0 ; Set to 1 to use a USA specific algorithm to tune some of the settings, not adviced outside the USA
logo_percentile=0.92 ; if more then this amount of logo is found then logo detection will be disabled
logo_threshold=0.70 ;0.80
aggressive_logo_rejection=1 ;0
connect_blocks_with_logo=1 ; set to 1 if you want successive blocks with logo on the transition to be regarded as connected, set to 0 to disable
cut_on_ar_change=1 ; set to 1 if you want to cut also on aspect ratio changes, set to 0 to disable
delete_show_after_last_commercial=1 ; delete the last block if its a show and after a commercial
delete_show_before_or_after_current=0 ;1 ; This can lead to the deletion of trailers of next show
delete_show_before_first_commercial=0
before_logo=0 ;1
after_logo=0 ;1
shrink_logo=0 ;5 ; Reduce the duration of the logo with this amount of seconds
padding=0
delete_logo_file=1 ; set to 1 if you want comskip to tidy up after finishing
output_framearray=1 ; create a big excel file for detailed analysis, set to 0 to disable
output_videoredo=1
output_womble=0
output_cuttermaran=0
output_mpgtx=0
output_zoomplayer_chapter=0
output_zoomplayer_cutlist=0
output_edl=0
live_tv=0
excessive_length_modifier=0.01
fps=29.97 ;NTSC=29.97 PAL=25
detect_method=255 ;47 ;1=black frame, 2=logo, 4=scene change, 8=fuzzy logic, 16=closed captions, 32=aspect ration, 255=all
verbose=10 ;10 ;show a lot of extra info, level 5 is also OK, set to 0 to disable
max_brightness=60 ;frame not black if any pixels checked are greater than this (scale 0 to 255)
test_brightness=40 ;frame not pure black if any pixels checked are greater than this, will check average brightness (scale 0 to 255)
max_avg_brightness=0 ;maximum average brightness for a dim frame to be considered black (scale 0 to 255) 0 means autosetting
max_commercialbreak=290 ;600 ;maximum length in seconds to consider a segment a commercial break
min_commercialbreak=10 ;minimum length in seconds to consider a segment a commercial break
max_commercial_size=61 ;120 ;maximum time in seconds for a single commercial or multiple commercials if no breaks in between
min_commercial_size=14 ;4 ;mimimum time in seconds for a single commercial
min_show_segment_length=260 ;60 ; any segment longer than this will be scored towards show.
non_uniformity=250
max_volume=0 ;500 ; any frame with sound volume larger than this will not be regarded as black frame
ticker_tape=0 ; Amount of pixels from bottom to ignore in all processing
intelligent_brightness=1 ;0 ; Set to 1 to use a USA specific algorithm to tune some of the settings, not adviced outside the USA
logo_percentile=0.92 ; if more then this amount of logo is found then logo detection will be disabled
logo_threshold=0.70 ;0.80
aggressive_logo_rejection=1 ;0
connect_blocks_with_logo=1 ; set to 1 if you want successive blocks with logo on the transition to be regarded as connected, set to 0 to disable
cut_on_ar_change=1 ; set to 1 if you want to cut also on aspect ratio changes, set to 0 to disable
delete_show_after_last_commercial=1 ; delete the last block if its a show and after a commercial
delete_show_before_or_after_current=0 ;1 ; This can lead to the deletion of trailers of next show
delete_show_before_first_commercial=0
before_logo=0 ;1
after_logo=0 ;1
shrink_logo=0 ;5 ; Reduce the duration of the logo with this amount of seconds
padding=0
delete_logo_file=1 ; set to 1 if you want comskip to tidy up after finishing
output_framearray=1 ; create a big excel file for detailed analysis, set to 0 to disable
output_videoredo=1
output_womble=0
output_cuttermaran=0
output_mpgtx=0
output_zoomplayer_chapter=0
output_zoomplayer_cutlist=0
output_edl=0
live_tv=0
excessive_length_modifier=0.01