Comskip Support Forum

Comskip is a free commercial detector, browse the forum for more information
It is currently Sat Sep 21, 2019 11:13 pm

All times are UTC [ DST ]

Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Sun Apr 19, 2015 11:57 pm 

Joined: Sun Apr 19, 2015 10:46 pm
Posts: 18
I have been testing version 81_072 lately on *.wtv files before I make it production. I'm seeing malfunctions in the audio line which causes a detection failure for commercials. Wondering if anybody else is encountering?

Notice the green line which to my understanding is audio.
This was with v81_072

Notice the green line on v81_071, just fine.

Same with additional 2 video files.




My config.ini:

; See comskip.txt in the distribution zip file for many settable parameters, read manual.html, tuning.html and debugwindow.html for how to tune and debug comskip
detect_method=107                  ; 1=black frame, 2=logo, 4=scene change, 8=fuzzy logic, 16=closed captions, 32=aspect ration, 64=silence, 128=cutscenes, 255=all
validate_silence=1                  ; Default, set to 0 to force using this clues if selected above.
validate_uniform=1                  ; Default, set to 0 to force using this clues (like pure white frames) if blackframe is selected above.
validate_scenechange=1               ; Default, set to 0 to force using this clues if selected above.
verbose=10                        ; *************** 10 in test mode **************** default show a lot of extra info, level 5 is also OK, set to 0 to disable
max_brightness=60                     ; frame not black if any pixels checked are greater than this (scale 0 to 255)
test_brightness=40                  ; frame not pure black if any pixels checked are greater than this, will check average brightness (scale 0 to 255)
max_avg_brightness=25               ; *************** 20 in test mode 25 normal**************** maximum average brightness for a dim frame to be considered black (scale 0 to 255) 0 means autosetting
intelligent_brightness=0             ; Set to 1 to use a USA specific algorithm to tune some of the settings, not adviced outside the USA
non_uniformity=500                  ; *************** 1000 in test mode 500 normal****************Set to 0 to disable cutpoints based on uniform frames
max_volume=500                     ; *************** 1000 in test mode 500 normal****************any frame with sound volume larger than this will not be regarded as black frame
min_silence=12                     ; Any deep silence longer than this amount  of frames is a possible cutpoint
max_commercialbreak=600             ; maximum length in seconds to consider a segment a commercial break
min_commercialbreak=20               ; minimum length in seconds to consider a segment a commercial break
max_commercial_size=125               ; maximum time in seconds for a single commercial or multiple commercials if no breaks in between
min_commercial_size=4               ; mimimum time in seconds for a single commercial
min_show_segment_length=250          ; any segment longer than this will be scored towards show.
ticker_tape=0                     ; Amount of pixels from bottom to ignore in all processing
logo_at_bottom=0                  ; Set to 1 to search only for logo at the lower half of the video, do not combine with subtitle setting
punish=0                        ; Compare to average for sum of 1=brightness, 2=uniform 4=volume, 8=silence, 16=schange, set to 0 to disable
punish_threshold=1.3               ; Multiply when amount is above average * punish_threshold
punish_modifier=2                  ; When above average * threshold multiply score by this value
logo_percentile=0.92               ; if more then this amount of logo is found then logo detection will be disabled
punish_no_logo=0                  ; Default, set to 0 to avoid show segments without logo to be scored towards commercial
connect_blocks_with_logo=1            ; set to 1 if you want successive blocks with logo on the transition to be regarded as connected, set to 0 to disable
logo_filter=0                        ; set the size of the filter to apply to bad logo detection, 4 seems to be a good value.
cut_on_ar_change=0                  ; set to 1 if you want to cut also on aspect ratio changes when logo is present, set to 2 to force cuts on aspect ratio changes. set to 0 to disable
delete_logo_file=0                  ; *************** 0 in test mode **************** set to 1 if you want comskip to tidy up after finishing
shrink_logo=5                     ; Sometimes the logo continues too long and only disappears during the start of the commercial. This can be solved by shrinking the duration of the logo by using
delete_show_after_last_commercial=0      ; set to 1 if you want to delete the last block if its a show and after a commercial
delete_show_before_or_after_current=0   ; set to 1 if you want to delete the previous and the next show in the recording, this can lead to the deletion of trailers of next show
delete_block_after_commercial=0         ;set to max size of block in seconds to be discarded, set to 0 to disable
remove_before=0                     ; amount of seconds of show to be removed before ALL commercials
remove_after=0                     ; amount of seconds of show to be removed after ALL commercials
after_logo=0                     ; set to number of seconds after logo disappears comskip should start to search for silence to insert an additional cutpoint
delete_show_after_last_commercial=1      ; Some recordings will contain after the final commercial the beginning of the next show.
skip_b_frames=0                     ; Set to 1 to force Comskip to skip frames for higher processing speed.
max_repair_size=200                  ; Will repair maximum 200 missing MPEG frames in the timeline, set to 0 to disable repairing for players that don't use PTS.
disable_heuristics=4               ; bit pattern for disabling heuristics, adding 1 disables heristics 1, adding 2 disables heristics 2, adding 4 disables heristics 3, 255  disables all heuristics
output_framearray=1                  ; *************** 1 in test mode **************** create a big excel file for detailed analysis, set to 0 to disable
output_debugwindow=1               ; *************** 1 in test mode ****************
output_data=0                     ; create a dump of the user data channel, used for CC and XDS (such as V-Chip info). Can be use together with output_framearray to remote debug CC decoding
output_videoredo=0                  ; The old videoredo format
output_videoredo3=0                  ; The new videoredo v3 format.
output_mls=0                     ; set to 1 if you want MPeg Video Wizard bookmark file output
output_dvrmstb=0                  ; Set to 1 if you're running DVRMS-Toolbox
output_btv=0                     ; set to 1 if you want Beyond TV chapter cutlist output
output_projectx=0                  ; set to 1 if you want ProjectX cutlist output (Xcl)
output_vdr=0                     ; set to 1 if you want XBMC to skipping commercials
output_demux=0                     ; set to 1 if you want comskip to demux the mpeg file while scanning
live_tv=0                        ; set to 1 if you use parallelprocessing and need the output while recording
live_tv_retries=4                  ; change to 16 when using live_tv in BTV, used for mpeg PS and TS
dvrms_live_tv_retries=300            ; only used for dvr_ms
standoff=0                        ; change to 8000000 when using live_tv in BTV
cuttermaran_options="cut=\"true\" unattended=\"true\" muxResult=\"false\" snapToCutPoints=\"true\" closeApp=\"true\""
mpeg2schnitt_options="mpeg2schnitt.exe /S /E /R25  /Z %2 %1"
avisynth_options="LoadPlugin(\"MPEG2Dec3.dll\") \nMPEG2Source(\"%s\")\n"
dvrcut_options="dvrcut \"\" \"\" "
windowtitle="Comskip - %s"

If there are other files I can provide please advise.

v81_072 Mike & Molly log file:

v81_072 Grimm log file:

v81_072 TMZ log file:

v81_071 Mike & Molly log file:

v81_071 Grimm log file:

v81_071 TMZ log file:

thank you

Reply with quote  
PostPosted: Mon Apr 20, 2015 7:49 am 
Site Admin

Joined: Sun Aug 21, 2005 3:49 pm
Posts: 3296
You file URL's don't work for me (blank page)
Can you zip and mail the log files?

Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC [ DST ]

Who is online

Users browsing this forum: No registered users and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group