Strange audio problem with v81_072 causing detection failure

Where all the bugs are reported and discussed
Post Reply
neIVIe515
Posts: 19
Joined: Sun Apr 19, 2015 10:46 pm

Strange audio problem with v81_072 causing detection failure

Post by neIVIe515 »

I have been testing version 81_072 lately on *.wtv files before I make it production. I'm seeing malfunctions in the audio line which causes a detection failure for commercials. Wondering if anybody else is encountering?

Notice the green line which to my understanding is audio.
This was with v81_072
Image

Notice the green line on v81_071, just fine.
Image

Same with additional 2 video files.
v81_072
Image

v81_071
Image

v81_072
Image

v81_071
Image

My config.ini:

Code: Select all

; See comskip.txt in the distribution zip file for many settable parameters, read manual.html, tuning.html and debugwindow.html for how to tune and debug comskip
; GENERAL DETECTION PARAMETERS
detect_method=107						; 1=black frame, 2=logo, 4=scene change, 8=fuzzy logic, 16=closed captions, 32=aspect ration, 64=silence, 128=cutscenes, 255=all
validate_silence=1						; Default, set to 0 to force using this clues if selected above.
validate_uniform=1						; Default, set to 0 to force using this clues (like pure white frames) if blackframe is selected above.
validate_scenechange=1					; Default, set to 0 to force using this clues if selected above.
verbose=10								; *************** 10 in test mode **************** default show a lot of extra info, level 5 is also OK, set to 0 to disable
;
; BRIGHTNESS, UNIFORMITY, VOLUME
max_brightness=60      					; frame not black if any pixels checked are greater than this (scale 0 to 255)
test_brightness=40      				; frame not pure black if any pixels checked are greater than this, will check average brightness (scale 0 to 255)
max_avg_brightness=25					; *************** 20 in test mode 25 normal**************** maximum average brightness for a dim frame to be considered black (scale 0 to 255) 0 means autosetting
intelligent_brightness=0 				; Set to 1 to use a USA specific algorithm to tune some of the settings, not adviced outside the USA
non_uniformity=500						; *************** 1000 in test mode 500 normal****************Set to 0 to disable cutpoints based on uniform frames
max_volume=500							; *************** 1000 in test mode 500 normal****************any frame with sound volume larger than this will not be regarded as black frame
min_silence=12							; Any deep silence longer than this amount  of frames is a possible cutpoint
;
; COMMERCIAL AND SHOW SIZES
max_commercialbreak=600 				; maximum length in seconds to consider a segment a commercial break
min_commercialbreak=20					; minimum length in seconds to consider a segment a commercial break
max_commercial_size=125					; maximum time in seconds for a single commercial or multiple commercials if no breaks in between
min_commercial_size=4   				; mimimum time in seconds for a single commercial
min_show_segment_length=250 			; any segment longer than this will be scored towards show.
ticker_tape=0							; Amount of pixels from bottom to ignore in all processing 
;
; LOGO SETTINGS
logo_at_bottom=0						; Set to 1 to search only for logo at the lower half of the video, do not combine with subtitle setting
punish=0								; Compare to average for sum of 1=brightness, 2=uniform 4=volume, 8=silence, 16=schange, set to 0 to disable
punish_threshold=1.3					; Multiply when amount is above average * punish_threshold
punish_modifier=2						; When above average * threshold multiply score by this value
logo_percentile=0.92					; if more then this amount of logo is found then logo detection will be disabled
logo_threshold=0.75
punish_no_logo=0						; Default, set to 0 to avoid show segments without logo to be scored towards commercial
aggressive_logo_rejection=0
connect_blocks_with_logo=1				; set to 1 if you want successive blocks with logo on the transition to be regarded as connected, set to 0 to disable
logo_filter=0               			; set the size of the filter to apply to bad logo detection, 4 seems to be a good value.
cut_on_ar_change=0						; set to 1 if you want to cut also on aspect ratio changes when logo is present, set to 2 to force cuts on aspect ratio changes. set to 0 to disable
delete_logo_file=0						; *************** 0 in test mode **************** set to 1 if you want comskip to tidy up after finishing
shrink_logo=5							; Sometimes the logo continues too long and only disappears during the start of the commercial. This can be solved by shrinking the duration of the logo by using
;
; SHOW BEFORE AND AFTER
delete_show_after_last_commercial=0		; set to 1 if you want to delete the last block if its a show and after a commercial
delete_show_before_or_after_current=0	; set to 1 if you want to delete the previous and the next show in the recording, this can lead to the deletion of trailers of next show
delete_block_after_commercial=0			;set to max size of block in seconds to be discarded, set to 0 to disable 
remove_before=0							; amount of seconds of show to be removed before ALL commercials
remove_after=0							; amount of seconds of show to be removed after ALL commercials
after_logo=0							; set to number of seconds after logo disappears comskip should start to search for silence to insert an additional cutpoint
padding=0
delete_show_after_last_commercial=1		; Some recordings will contain after the final commercial the beginning of the next show. 
;
; AUDIO
ms_audio_delay=5
volume_slip=40
;
; MISC
skip_b_frames=0							; Set to 1 to force Comskip to skip frames for higher processing speed.
max_repair_size=200						; Will repair maximum 200 missing MPEG frames in the timeline, set to 0 to disable repairing for players that don't use PTS. 
disable_heuristics=4					; bit pattern for disabling heuristics, adding 1 disables heristics 1, adding 2 disables heristics 2, adding 4 disables heristics 3, 255  disables all heuristics 
;
; TUNING OUTPUT
output_framearray=1						; *************** 1 in test mode **************** create a big excel file for detailed analysis, set to 0 to disable
output_debugwindow=1					; *************** 1 in test mode ****************
output_data=0							; create a dump of the user data channel, used for CC and XDS (such as V-Chip info). Can be use together with output_framearray to remote debug CC decoding
output_videoredo=0						; The old videoredo format
output_videoredo3=0						; The new videoredo v3 format.
output_womble=0
output_mls=0							; set to 1 if you want MPeg Video Wizard bookmark file output
output_cuttermaran=0
output_mpeg2schnitt=0
output_mpgtx=0
output_dvrcut=0
output_zoomplayer_chapter=0
output_zoomplayer_cutlist=0
output_edl=1
output_dvrmstb=0						; Set to 1 if you're running DVRMS-Toolbox
output_edlx=0
output_vcf=0
output_bsplayer=0
output_btv=0							; set to 1 if you want Beyond TV chapter cutlist output
output_projectx=0						; set to 1 if you want ProjectX cutlist output (Xcl)
output_avisynth=0
output_vdr=0							; set to 1 if you want XBMC to skipping commercials
output_demux=0							; set to 1 if you want comskip to demux the mpeg file while scanning
sage_framenumber_bug=0
sage_minute_bug=0
live_tv=0								; set to 1 if you use parallelprocessing and need the output while recording
live_tv_retries=4						; change to 16 when using live_tv in BTV, used for mpeg PS and TS
dvrms_live_tv_retries=300				; only used for dvr_ms
standoff=0								; change to 8000000 when using live_tv in BTV
cuttermaran_options="cut=\"true\" unattended=\"true\" muxResult=\"false\" snapToCutPoints=\"true\" closeApp=\"true\""
mpeg2schnitt_options="mpeg2schnitt.exe /S /E /R25  /Z %2 %1"
avisynth_options="LoadPlugin(\"MPEG2Dec3.dll\") \nMPEG2Source(\"%s\")\n"
dvrcut_options="dvrcut \"%s.dvr-ms\" \"%s_clean.dvr-ms\" "
windowtitle="Comskip - %s"
If there are other files I can provide please advise.

v81_072 Mike & Molly log file: https://filetea.me/t1sVO6JFENHQsCMwavkxYylJw

v81_072 Grimm log file: https://filetea.me/t1sqSRQe9kQRXKsHnKCaxkIXw

v81_072 TMZ log file: https://filetea.me/t1shWwT79GvQQC87J00oloDNg

v81_071 Mike & Molly log file: https://filetea.me/t1sq4xYiBaxRZ2wGv9L4vIB3A

v81_071 Grimm log file: https://filetea.me/t1suljxnb80RAGmib5yYgOo8g

v81_071 TMZ log file: https://filetea.me/t1shyr1GeM4TLxZOxNKRpx5MA

thank you
erik
Site Admin
Posts: 3370
Joined: Sun Aug 21, 2005 3:49 pm

Re: Strange audio problem with v81_072 causing detection fai

Post by erik »

You file URL's don't work for me (blank page)
Can you zip and mail the log files?
Basymn
Posts: 2
Joined: Sat Nov 17, 2012 12:27 pm

-

Post by Basymn »

How can i link my non-steam account with my steam account
i used to play the non-steam version of the game since season 1 but now i downloaded the steam version and i want to play it on steam is there any way to link my old account with the new one ?
Basymn
Posts: 2
Joined: Sat Nov 17, 2012 12:27 pm

hi!

Post by Basymn »

I have been testing version 81_072 lately on *.wtv files before I make it production. I'm seeing malfunctions in the audio line which causes a detection failure for commercials. Wondering if anybody else is encountering? Notice the green line which to my understanding is audio. This was with v81_072 Notice the green line on v81_071, just fine. Same with additional 2 video files. v81_072 v81_071 v81_072 v81_071 My config.ini: Code: Select all; See comskip.txt in the distribution zip file for many settable parameters, read manual.html, tuning.html and debugwindow.html for how to tune and debug comskip ; GENERAL DETECTION PARAMETERS detect_method=107 ; 1=black frame, 2=logo, 4=scene change, 8=fuzzy logic, 16=closed captions, 32=aspect ration, 64=silence, 128=cutscenes, 255=all validate_silence=1 ; Default, set to 0 to force using this clues if selected above. validate_uniform=1 ; Default, set to 0 to force using this clues (like pure white frames) if blackframe is selected above. validate_scenechange=1 ; Default, set to 0 to force using this clues if selected above. verbose=10 ; *************** 10 in test mode **************** default show a lot of extra info, level 5 is also OK, set to 0 to disable ; ; BRIGHTNESS, UNIFORMITY, VOLUME max_brightness=60 ; frame not black if any pixels checked are greater than this (scale 0 to 255) test_brightness=40 ; frame not pure black if any pixels checked are greater than this, will check average brightness (scale 0 to 255) max_avg_brightness=25 ; *************** 20 in test mode 25 normal**************** maximum average brightness for a dim frame to be considered black (scale 0 to 255) 0 means autosetting intelligent_brightness=0 ; Set to 1 to use a USA specific algorithm to tune some of the settings, not adviced outside the USA non_uniformity=500 ; *************** 1000 in test mode 500 normal****************Set to 0 to disable cutpoints based on uniform frames max_volume=500 ; *************** 1000 in test mode 500 normal****************any frame with sound volume larger than this will not be regarded as black frame min_silence=12 ; Any deep silence longer than this amount of frames is a possible cutpoint ; ; COMMERCIAL AND SHOW SIZES max_commercialbreak=600 ; maximum length in seconds to consider a segment a commercial break min_commercialbreak=20 ; minimum length in seconds to consider a segment a commercial break max_commercial_size=125 ; maximum time in seconds for a single commercial or multiple commercials if no breaks in between min_commercial_size=4 ; mimimum time in seconds for a single commercial min_show_segment_length=250 ; any segment longer than this will be scored towards show. ticker_tape=0 ; Amount of pixels from bottom to ignore in all processing ; ; LOGO SETTINGS logo_at_bottom=0 ; Set to 1 to search only for logo at the lower half of the video, do not combine with subtitle setting punish=0 ; Compare to average for sum of 1=brightness, 2=uniform 4=volume, 8=silence, 16=schange, set to 0 to disable punish_threshold=1.3 ; Multiply when amount is above average * punish_threshold punish_modifier=2 ; When above average * threshold multiply score by this value logo_percentile=0.92 ; if more then this amount of logo is found then logo detection will be disabled logo_threshold=0.75 punish_no_logo=0 ; Default, set to 0 to avoid show segments without logo to be scored towards commercial aggressive_logo_rejection=0 connect_blocks_with_logo=1 ; set to 1 if you want successive blocks with logo on the transition to be regarded as connected, set to 0 to disable logo_filter=0 ; set the size of the filter to apply to bad logo detection, 4 seems to be a good value. cut_on_ar_change=0 ; set to 1 if you want to cut also on aspect ratio changes when logo is present, set to 2 to force cuts on aspect ratio changes. set to 0 to disable delete_logo_file=0 ; *************** 0 in test mode **************** set to 1 if you want comskip to tidy up after finishing shrink_logo=5 ; Sometimes the logo continues too long and only disappears during the start of the commercial. This can be solved by shrinking the duration of the logo by using ; ; SHOW BEFORE AND AFTER delete_show_after_last_commercial=0 ; set to 1 if you want to delete the last block if its a show and after a commercial delete_show_before_or_after_current=0 ; set to 1 if you want to delete the previous and the next show in the recording, this can lead to the deletion of trailers of next show delete_block_after_commercial=0 ;set to max size of block in seconds to be discarded, set to 0 to disable remove_before=0 ; amount of seconds of show to be removed before ALL commercials remove_after=0 ; amount of seconds of show to be removed after ALL commercials after_logo=0 ; set to number of seconds after logo disappears comskip should start to search for silence to insert an additional cutpoint padding=0 delete_show_after_last_commercial=1 ; Some recordings will contain after the final commercial the beginning of the next show. ; ; AUDIO ms_audio_delay=5 volume_slip=40 ; ; MISC skip_b_frames=0 ; Set to 1 to force Comskip to skip frames for higher processing speed. max_repair_size=200 ; Will repair maximum 200 missing MPEG frames in the timeline, set to 0 to disable repairing for players that don't use PTS. disable_heuristics=4 ; bit pattern for disabling heuristics, adding 1 disables heristics 1, adding 2 disables heristics 2, adding 4 disables heristics 3, 255 disables all heuristics ; ; TUNING OUTPUT output_framearray=1 ; *************** 1 in test mode **************** create a big excel file for detailed analysis, set to 0 to disable output_debugwindow=1 ; *************** 1 in test mode **************** output_data=0 ; create a dump of the user data channel, used for CC and XDS (such as V-Chip info). Can be use together with output_framearray to remote debug CC decoding output_videoredo=0 ; The old videoredo format output_videoredo3=0 ; The new videoredo v3 format. output_womble=0 output_mls=0 ; set to 1 if you want MPeg Video Wizard bookmark file output output_cuttermaran=0 output_mpeg2schnitt=0 output_mpgtx=0 output_dvrcut=0 output_zoomplayer_chapter=0 output_zoomplayer_cutlist=0 output_edl=1 output_dvrmstb=0 ; Set to 1 if you're running DVRMS-Toolbox output_edlx=0 output_vcf=0 output_bsplayer=0 output_btv=0 ; set to 1 if you want Beyond TV chapter cutlist output output_projectx=0 ; set to 1 if you want ProjectX cutlist output (Xcl) output_avisynth=0 output_vdr=0 ; set to 1 if you want XBMC to skipping commercials output_demux=0 ; set to 1 if you want comskip to demux the mpeg file while scanning sage_framenumber_bug=0 sage_minute_bug=0 live_tv=0 ; set to 1 if you use parallelprocessing and need the output while recording live_tv_retries=4 ; change to 16 when using live_tv in BTV, used for mpeg PS and TS dvrms_live_tv_retries=300 ; only used for dvr_ms standoff=0 ; change to 8000000 when using live_tv in BTV cuttermaran_options="cut=\"true\" unattended=\"true\" muxResult=\"false\" snapToCutPoints=\"true\" closeApp=\"true\"" mpeg2schnitt_options="mpeg2schnitt.exe /S /E /R25 /Z %2 %1" avisynth_options="LoadPlugin(\"MPEG2Dec3.dll\") \nMPEG2Source(\"%s\")\n" dvrcut_options="dvrcut \"%s.dvr-ms\" \"%s_clean.dvr-ms\" " windowtitle="Comskip - %s"

At all I do not know, as to tell...
Post Reply