Comskip Support Forum

Comskip is a free commercial detector, browse the forum for more information
It is currently Mon Jul 23, 2018 6:37 pm

All times are UTC [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Sat Jan 16, 2016 10:22 pm 
Offline

Joined: Sat Jan 16, 2016 10:14 pm
Posts: 3
When reviewing a file and hitting W to save the output using the config below, comskip 089 crashes

Edit: It appears the issue is with output_edlx and output_edlp. When either one is enabled (set to 1) the gui crashes after pressing W when the file is being reviewed.

Quote:
detect_method=45 ;1=black frame, 2=logo, 4=scene change, 8=fuzzy logic, 16=closed captions, 32=aspect ration, 64=silence, 128=cutscenes, 255=all
validate_silence=1 ; Default, set to 0 to force using this clues if selected above.
validate_uniform=1 ; Default, set to 0 to force using this clues (like pure white frames) if blackframe is selected above.
validate_scenechange=1 ; Default, set to 0 to force using this clues if selected above.
verbose=10 ;show a lot of extra info, level 5 is also OK, set to 0 to disable
max_brightness=60 ;frame not black if any pixels checked are greater than this (scale 0 to 255)
test_brightness=40 ;frame not pure black if any pixels checked are greater than this, will check average brightness (scale 0 to 255)
max_avg_brightness=25 ;maximum average brightness for a dim frame to be considered black (scale 0 to 255) 0 means autosetting
max_commercialbreak=600 ;maximum length in seconds to consider a segment a commercial break
min_commercialbreak=30 ;minimum length in seconds to consider a segment a commercial break
max_commercial_size=180 ;maximum time in seconds for a single commercial or multiple commercials if no breaks in between
min_commercial_size=25 ;mimimum time in seconds for a single commercial
min_show_segment_length=240 ; any segment longer than this will be scored towards show.
non_uniformity=500 ; Set to 0 to disable cutpoints based on uniform frames
max_volume=500 ; any frame with sound volume larger than this will not be regarded as black frame
min_silence=12 ; Any deep silence longer than this amount of frames is a possible cutpoint
ticker_tape=0 ; Amount of pixels from bottom to ignore in all processing
logo_at_bottom=0 ; Set to 1 to search only for logo at the lower half of the video, do not combine with subtitle setting
punish=0 ; Compare to average for sum of 1=brightness, 2=uniform 4=volume, 8=silence, 16=schange, set to 0 to disable
punish_threshold=1.3 ; Multiply when amount is above average * punish_threshold
punish_modifier=2 ; When above average * threshold multiply score by this value
intelligent_brightness=0 ; Set to 1 to use a USA specific algorithm to tune some of the settings, not adviced outside the USA
logo_percentile=0.92 ; if more then this amount of logo is found then logo detection will be disabled
logo_threshold=0.75
punish_no_logo=1 ; Default, set to 0 to avoid show segments without logo to be scored towards commercial
aggressive_logo_rejection=0
connect_blocks_with_logo=1 ; set to 1 if you want successive blocks with logo on the transition to be regarded as connected, set to 0 to disable
logo_filter=0 ; set the size of the filter to apply to bad logo detection, 4 seems to be a good value.
cut_on_ar_change=1 ; set to 1 if you want to cut also on aspect ratio changes when logo is present, set to 2 to force cuts on aspect ratio changes. set to 0 to disable
delete_show_after_last_commercial=0 ; set to 1 if you want to delete the last block if its a show and after a commercial
delete_show_before_or_after_current=0 ; set to 1 if you want to delete the previous and the next show in the recording, this can lead to the deletion of trailers of next show
delete_block_after_commercial=0 ;set to max size of block in seconds to be discarded, set to 0 to disable
remove_before=0 ; amount of seconds of show to be removed before ALL commercials
remove_after=0 ; amount of seconds of show to be removed after ALL commercials
shrink_logo=5 ; Reduce the duration of the logo with this amount of seconds
after_logo=0 ; set to number of seconds after logo disappears comskip should start to search for silence to insert an additional cutpoint
padding=0
ms_audio_delay=5
volume_slip=20
skip_b_frames=0 ; Set to 1 to force Comskip to skip frames for higher processing speed.
hardware_decode=0 ; Set to 1 to enable hardware accelerated video decoding, only available in donator version
max_repair_size=200 ; Will repair maximum 200 missing MPEG frames in the timeline, set to 0 to disable repairing for players that don't use PTS.
disable_heuristics=4
delete_logo_file=0 ; set to 1 if you want comskip to tidy up after finishing
output_framearray=0 ; create a big excel file for detailed analysis, set to 0 to disable
output_data=0 ; create a dump of the user data channel, used for CC and XDS (such as V-Chip info). Can be use together with output_framearray to remote debug CC decoding
output_videoredo=0 ; The old videoredo format
output_videoredo3=0 ; The new videoredo v3 format.
output_womble=0
output_mls=0 ; set to 1 if you want MPeg Video Wizard bookmark file output
output_cuttermaran=0
output_mpeg2schnitt=0
output_mpgtx=0
output_dvrcut=0
output_zoomplayer_chapter=0
output_zoomplayer_cutlist=0
output_edl=1
output_dvrmstb=0 ; Set to 1 if you're running DVRMS-Toolbox
output_edlx=1
output_vcf=0
output_bsplayer=0
output_btv=0 ; set to 1 if you want Beyond TV chapter cutlist output
output_projectx=0 ; set to 1 if you want ProjectX cutlist output (Xcl)
output_avisynth=1
output_vdr=0 ; set to 1 if you want XBMC to skipping commercials
output_demux=0 ; set to 1 if you want comskip to demux the mpeg file while scanning
sage_framenumber_bug=0
sage_minute_bug=0
live_tv=0 ; set to 1 if you use parallelprocessing and need the output while recording
live_tv_retries=4 ; change to 16 when using live_tv in BTV, used for mpeg PS and TS
dvrms_live_tv_retries=300 ; only used for dvr_ms
standoff=0 ; change to 8000000 when using live_tv in BTV
cuttermaran_options="cut=\"true\" unattended=\"true\" muxResult=\"false\" snapToCutPoints=\"true\" closeApp=\"true\""
mpeg2schnitt_options="mpeg2schnitt.exe /S /E /R25 /Z %2 %1"
avisynth_options="LoadPlugin(\"MPEG2Dec3.dll\") \nMPEG2Source(\"%s\")\n"
dvrcut_options="dvrcut \"%s.dvr-ms\" \"%s_clean.dvr-ms\" "
windowtitle="Comskip - %s"
thread_count=3
subtitles=0
delay_logo_search=0
output_srt=0
output_edlp=0



Crash analysis
Code:
FAULTING_IP:
image00400000+1a8ff
0041a8ff 8b5a38          mov     ebx,dword ptr [edx+38h]

EXCEPTION_RECORD:  ffffffff -- (.exr 0xffffffffffffffff)
ExceptionAddress: 0041a8ff (image00400000+0x0001a8ff)
   ExceptionCode: c0000005 (Access violation)
  ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 00000000
   Parameter[1]: 000061c8
Attempt to read from address 000061c8

CONTEXT:  00000000 -- (.cxr 0x0;r)
eax=776029a0 ebx=00000000 ecx=00000000 edx=00006190 esi=00000000 edi=00000000
eip=0041a8ff esp=0028ab00 ebp=0028abf8 iopl=0         nv up ei pl nz na pe nc
cs=0023  ss=002b  ds=002b  es=002b  fs=0053  gs=002b             efl=00210206
image00400000+0x1a8ff:
0041a8ff 8b5a38          mov     ebx,dword ptr [edx+38h] ds:002b:000061c8=????????

FAULTING_THREAD:  00012f98

PROCESS_NAME:  image00400000

ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_PARAMETER1:  00000000

EXCEPTION_PARAMETER2:  000061c8

READ_ADDRESS:  000061c8

FOLLOWUP_IP:
image00400000+1a8ff
0041a8ff 8b5a38          mov     ebx,dword ptr [edx+38h]

NTGLOBALFLAG:  70

APPLICATION_VERIFIER_FLAGS:  0

APP:  image00400000

ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) x86fre

BUGCHECK_STR:  APPLICATION_FAULT_INVALID_POINTER_READ_BEFORE_WRITE

PRIMARY_PROBLEM_CLASS:  INVALID_POINTER_READ_BEFORE_WRITE

DEFAULT_BUCKET_ID:  INVALID_POINTER_READ_BEFORE_WRITE

LAST_CONTROL_TRANSFER:  from 00436fc6 to 0041a8ff

STACK_TEXT: 
WARNING: Stack unwind information not available. Following frames may be wrong.
0028abf8 00436fc6 00000000 ffffffff 00000003 image00400000+0x1a8ff
0028ac40 75a10d5d 04645698 00000000 776032bc image00400000+0x36fc6
0028ac7c 7756f28f 4c7d8eb1 00000000 00000024 KERNELBASE!WideCharToMultiByte+0x236
0028acd4 7756a442 0028ad48 77588cd5 3b026309 msvcrt!__lock_fhandle+0x94
0028ad0c 7756f1fc 00000011 0028ad58 775d8e9f msvcrt!_unlock+0x15
0028ad18 775d8e9f 00000001 77602920 775d8e8a msvcrt!_unlock_file2+0x16
0028ad24 775d8e8a 4c7d8f59 048d4230 048d41e0 msvcrt!puts+0x16c
0028ad58 0043ae57 00bc607c 00000001 02a28600 msvcrt!puts+0x15e
00000000 00000000 00000000 00000000 00000000 image00400000+0x3ae57


STACK_COMMAND:  .cxr 0x0 ; kb

SYMBOL_STACK_INDEX:  0

SYMBOL_NAME:  image00400000+1a8ff

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: image00400000

IMAGE_NAME:  comskipGUI.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  563de97a

FAILURE_BUCKET_ID:  INVALID_POINTER_READ_BEFORE_WRITE_c0000005_comskipGUI.exe!Unknown

BUCKET_ID:  APPLICATION_FAULT_INVALID_POINTER_READ_BEFORE_WRITE_image00400000+1a8ff

ANALYSIS_SOURCE:  UM

FAILURE_ID_HASH_STRING:  um:invalid_pointer_read_before_write_c0000005_comskipgui.exe!unknown

FAILURE_ID_HASH:  {1ea4c2a9-eae3-def5-7e75-718b7f4ce769}

Followup: MachineOwner


Top
 Profile  
Reply with quote  
PostPosted: Sun Jan 17, 2016 2:52 pm 
Offline
Site Admin

Joined: Sun Aug 21, 2005 3:49 pm
Posts: 3190
I did not test lately, will have a go at it


Top
 Profile  
Reply with quote  
PostPosted: Wed Jan 20, 2016 11:05 pm 
Offline

Joined: Sat Jan 16, 2016 10:14 pm
Posts: 3
This might be related to another issue I'm having. When I press W during the review process, all the entries in the output files are either 0 or 0.0

I think this specific crash is due to fprintf trying to parse 0.0 into %I64d format


Top
 Profile  
Reply with quote  
PostPosted: Thu Jan 28, 2016 8:15 am 
Offline
Site Admin

Joined: Sun Aug 21, 2005 3:49 pm
Posts: 3190
Would be solved in 0.81.09
Can you test?


Top
 Profile  
Reply with quote  
PostPosted: Mon Feb 01, 2016 12:29 am 
Offline

Joined: Sat Jan 16, 2016 10:14 pm
Posts: 3
Confirmed, it no longer crashes.

Thanks!


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group