Exception raised, Comskip is terminating
Posted: Thu Dec 07, 2006 9:40 pm
Hey Erik!
All previous verisons v62 and earlier worked flawlessly. But now, since v63, and now v64, I've been getting Exception errors. It crashes almost immediately upon start. Doesn't seem to run. Basically the same comskip.ini file too. The exact phrasing is: "Exception raised, Comskip is terminating".
If it is helpful, the comskip .exe and .ini files are in the same directory, but the directory is displayed differently between them. Also, you seem to have changed this since v62 too. Might be the problem, or just coincidence.
Will be using v62 to keep up with the new shows in the mean time, but can test any time there's a new version. Any help I can give, please ask.
Thanks in advance, hun!
PS. I'm including the output .log file I ran on my example, but it is the same for all files:
All previous verisons v62 and earlier worked flawlessly. But now, since v63, and now v64, I've been getting Exception errors. It crashes almost immediately upon start. Doesn't seem to run. Basically the same comskip.ini file too. The exact phrasing is: "Exception raised, Comskip is terminating".
If it is helpful, the comskip .exe and .ini files are in the same directory, but the directory is displayed differently between them. Also, you seem to have changed this since v62 too. Might be the problem, or just coincidence.
Will be using v62 to keep up with the new shows in the mean time, but can test any time there's a new version. Any help I can give, please ask.
Thanks in advance, hun!
PS. I'm including the output .log file I ran on my example, but it is the same for all files:
Code: Select all
################################################################
Generated using Comskip 0.79.64
Time at start of run:
Thu Dec 07 12:35:46 2006
################################################################
Mpeg: z.mpg
Exe C:\Progra~1\SageTV\SageTV\comskip\comskip.exe
Logo: z.logo.txt
Ini: C:\Program Files\SageTV\SageTV\comskip\comskip.ini
Detection Methods to be used:
1) Black Frame
2) Logo - Give up after 2000 seconds
3) Scene Change
4) Fuzzy Logic
5) Closed Captions
6) Aspect Ratio
7) Silence
ComSkip throttles back from 0800 to 0200.
The time is now 1235 so comskip is running slowly.
Settings
--------
[Main Settings]
;the sum of the values for which kind of frames comskip will consider as possible cutpoints: 1=uniform (black or any other color) frame, 2=logo, 4=scene change, 8=fuzzy logic, 16=closed captions, 32=aspect ration, 64=silence, 255=all.
detect_method=255
;Set to 10 to show a lot of extra info, level 5 is also OK, set to 0 to disable
verbose=10
;Frame not black if any of the pixels of the frame has a brightness greater than this (scale 0 to 255)
max_brightness=60
;Frame not pure black if a small number of the pixels of the frame has a brightness greater than this. To decide if the frame is truly black, comskip will also check average brightness (scale 0 to 255)
test_brightness=40
;
max_avg_brightness=20
;
max_commercialbreak=305
;
min_commercialbreak=21
;
max_commercial_size=65
;
min_commercial_size=14
;
min_show_segment_length=291
;
max_volume=0
;
non_uniformity=250
[Detailed Settings]
min_silence=20
noise_level=5
brightness_jump=200
fps=25
validate_silence=1
validate_uniform=1
validate_scenechange=1
global_threshold=1.05
[CPU Load Reduction]
play_nice_start=800
play_nice_end=200
play_nice_sleep=10
[Input Correction]
max_repair_size=40
ms_audio_delay=5
volume_slip=10
[Aspect Ratio]
ar_delta=0.05
cut_on_ar_change=1
[Global Removes]
padding=0
remove_before=0
remove_after=0
delete_show_after_last_commercial=0
delete_show_before_first_commercial=0
delete_show_before_or_after_current=0
delete_block_after_commercial=0
[USA Specific]
intelligent_brightness=1
black_percentile=0.0073
uniform_percentile=0.005
score_percentile=0.71
[Main Scoring]
length_strict_modifier=3
length_nonstrict_modifier=1.5
combined_length_strict_modifier=2
combined_length_nonstrict_modifier=1.25
ar_wrong_modifier=2
excessive_length_modifier=0.01
dark_block_modifier=0.3
min_schange_modifier=0.5
max_schange_modifier=2
logo_present_modifier=0.01
punish_no_logo=1
[Detailed Scoring]
punish=0
reward=0
punish_threshold=1.3
punish_modifier=2
reward_modifier=0.5
[Logo Finding]
border=10
give_up_logo_search=2000
logo_max_percentage_of_screen=0.1
ticker_tape=0
ignore_side=0
subtitles=0
logo_at_bottom=0
logo_threshold=0.7
aggressive_logo_rejection=1
edge_level_threshold=5
edge_radius=2
num_logo_buffers=50
use_existing_logo_file=1
two_pass_logo=1
[Logo Interpretation]
connect_blocks_with_logo=1
logo_percentile=0.92
shrink_logo=5
before_logo=0
after_logo=0
where_logo=0
min_black_frames_for_break=1
[Closed Captioning]
ccCheck=1
cc_commercial_type_modifier=4
cc_wrong_type_modifier=2
cc_correct_type_modifier=0.75
[Live TV]
live_tv=0
live_tv_retries=1
standoff=0
require_div5=0
div5_tolerance=-1
[Output Control]
output_default=0
output_zoomplayer_cutlist=0
output_zoomplayer_chapter=0
output_vcf=0
output_projectx=0
output_videoredo=0
output_btv=0
output_edl=1
output_bsplayer=0
output_edlx=0
output_cuttermaran=0
output_mpeg2schnitt=0
output_womble=0
output_mls=0
output_mpgtx=0
output_dvrcut=0
output_framearray=0
output_debugwindow=0
output_tuning=0
output_training=0
output_demux=0
output_timing=0
delete_logo_file=1
[Sage Workarounds]
sage_framenumber_bug=0
sage_minute_bug=0