Comskip Support Forum

Comskip is a free commercial detector, browse the forum for more information
It is currently Thu Nov 23, 2017 5:25 pm

All times are UTC [ DST ]




Post new topic Reply to topic  [ 19 posts ]  Go to page Previous  1, 2
Author Message
PostPosted: Sat Oct 24, 2015 11:26 am 
Offline

Joined: Sun Apr 19, 2015 10:46 pm
Posts: 13
Sleepy Hollow seems to do better with this one instead of General.

Code:
; MAIN SETTING
detect_method=43                ; 1=black frame, 2=logo, 4=scene change, 8=fuzzy logic, 16=closed captions, 32=aspect ration, 64=silence, 128=cutscenes, 255=all
verbose=0                      ; ******* 10 for testing *******
max_brightness=60
maxbright=1
test_brightness=40
max_avg_brightness=25
max_commercialbreak=600
min_commercialbreak=25
max_commercial_size=150
min_commercial_size=4
min_show_segment_length=250       ; default 250 Any block larger then this in seconds is regarded as a show block
max_volume=500
max_silence=100
non_uniformity=500
; DETAILED SETTING
min_silence=12
noise_level=5
brightness_jump=200
fps=25
validate_silence=1
validate_uniform=1
validate_scenechange=1
global_threshold=1.05
disable_heuristics=4
; CPU LOAD
hardware_decode=0
play_nice_start=-1
play_nice_end=-1
play_nice_sleep=2
thread_count=2
skip_B_frames=0
; INPUT CORRECTION
max_repair_size=200
ms_audio_delay=5
volume_slip=40
variable_bitrate=1
; ASPECT RATIO
ar_delta=0.08
cut_on_ar_change=0                ; set to 1 if you want to cut also on aspect ratio changes when logo is present, set to 2 to force cuts on aspect ratio changes. set to 0 to disable
; GLOBAL REMOVES
padding=0
remove_before=0
remove_after=0
added_recording=14
delete_show_after_last_commercial=0
delete_show_before_first_commercial=0
delete_show_before_or_after_current=0
delete_block_after_commercial=0
min_commercial_break_at_start_or_end=39
always_keep_first_seconds=100
always_keep_last_seconds=0
; USA SPECIFIC
intelligent_brightness=0
black_percentile=0.0076
uniform_percentile=0.003
score_percentile=0.71
; MAIN SCORING
length_strict_modifier=3
length_nonstrict_modifier=1.5
combined_length_strict_modifier=2
combined_length_nonstrict_modifier=1.25
ar_wrong_modifier=2
excessive_length_modifier=0.01
dark_block_modifier=0.3
min_schange_modifier=0.5
max_schange_modifier=2
logo_present_modifier=0.01
punish_no_logo=1                ; default 1 do not modify the score of a block because it has no logo
; DETAILED SCORING
punish=0
reward=0
punish_threshold=1.3
punish_modifier=2
reward_modifier=0.5
; LOGO FINDING
border=10
give_up_logo_search=2000
delay_logo_search=0
logo_max_percentage_of_screen=0.1    ; default 0.1
ticker_tape=0
ticker_tape_percentage=0
ignore_side=0
subtitles=0
logo_at_bottom=0
logo_threshold=0.75             ; a logo is searched using a logo mask.  the logo threshold determines how much of the logo mask must match the video.  only very clean logos can use a value of 0.9 or higher.  you can see the qualtity of the logo detection in the yellow line in the debug window.  the cleaner/higher the line, the better the quality, the higher you can set the threshold.
logo_percentage_threshold=0.25       ; the logo precentage threshold determines the percentage of frames in a block that must (not) have logo to be promoted/punished.  a higher value is useful if logo is good and you have commercials blocks with a bit of logo.
logo_filter=0
aggressive_logo_rejection=0
edge_level_threshold=5
edge_radius=2
edge_weight=10
edge_step=1
num_logo_buffers=50
use_existing_logo_file=1          ; use logo file already created at beginning of show
two_pass_logo=1                ; when enabled the recording processing will restart when logo is found to ensure best quality logo coveage
; LOGO INTERPRETATION
connect_blocks_with_logo=1
logo_percentile=0.92
logo_fraction=0.4
shrink_logo=5                   ; default 5 use this to shrink the logo so it disappears before the commercial
shrink_logo_tail=0
before_logo=0
after_logo=0
where_logo=0
min_black_frames_for_break=1
; CLOSED CAPTIONING
ccCheck=0
cc_commercial_type_modifier=4
cc_wrong_type_modifier=2
cc_correct_type_modifier=0.75
; LIVE TV
live_tv=0
live_tv_retries=4
require_div5=0
div5_tolerance=-1
incommercial_frames=1000
; OUTPUT CONTROL
output_default=1
output_chapters=0
output_plist_cutlist=0
output_zoomplayer_cutlist=0
output_zoomplayer_chapter=0
output_vcf=0
output_vdr=0
output_projectx=0
output_avisynth=0
output_videoredo=0
output_videoredo3=0
videoredo_offset=2
output_btv=0
output_edl=1
edl_offset=0
edl_skip_field=0
output_edlp=0
output_bsplayer=0
output_edlx=0
output_cuttermaran=0
output_mpeg2schnitt=0
output_womble=0
output_mls=0
output_mpgtx=0
output_dvrmstb=0
output_dvrcut=0
output_ipodchap=0
output_framearray=0             ; ******** 1 for testing ********
output_debugwindow=0             ; ******** 1 for testing ********
output_tuning=0
output_training=0
output_false=0
output_aspect=0
output_demux=0
output_data=0                   ; ******** 1 for testing ********
output_srt=0
output_smi=0
output_timing=0
output_incommercial=0
delete_logo_file=1                ; ******** 0 for testing ********
; CUTSCENE PROCESSING
cutscene_frame=0
cutscene_dumpfile=""
cutscene_threshold=10
cutscenefile1=""
cutscenefile2=""
cutscenefile3=""
cutscenefile4=""
cutscenefile5=""
cutscenefile6=""
cutscenefile7=""
cutscenefile8=""
windowtitle="Comskip - %s"
cuttermaran_options="cut=\"true\" unattended=\"true\" muxResult=\"false\" snapToCutPoints=\"true\" closeApp=\"true\""
mpeg2schnitt_options="mpeg2schnitt.exe /S /E /R25  /Z %2 %1"
avisynth_options="LoadPlugin(\"MPEG2Dec3.dll\") \nMPEG2Source(\"%s\")\n"
dvrcut_options="dvrcut \"%s.dvr-ms\" \"%s_clean.dvr-ms\" "


Top
 Profile  
Reply with quote  
PostPosted: Tue May 02, 2017 3:35 am 
Offline

Joined: Tue May 02, 2017 3:17 am
Posts: 2
neIVIe515: Curious where you are for your current general INI file. Has much changed in the last couple of years since you last posted? I am currently just using the default comskip ini file. For the show, The Middle the problem I currently have is that show in generally "ends" goes into a 3-4 minute commercial break including introducing the next show, and then comes back with a 30 second final closing segment. My current ini file always deletes this. Just curious in all the work you have done if your general INI file has evolved to keep a single INI file working for most shows and not cut of on these small closing segments, or whether you have still been using a unique one for The Middle show.


Top
 Profile  
Reply with quote  
PostPosted: Mon Sep 04, 2017 12:08 am 
Offline

Joined: Sun Sep 03, 2017 11:42 pm
Posts: 1
I too am having issues losing the closing segments of shows like BBT or The Middle. I have been using the default comskip_donate, and have been very happy with the results except for this one issue on 30 second closing segments.

Is there a simple fix for this in the defaut .ini?

Thanks!


Top
 Profile  
Reply with quote  
PostPosted: Mon Sep 04, 2017 7:06 am 
Offline
Site Admin

Joined: Sun Aug 21, 2005 3:49 pm
Posts: 3098
Change
always_keep_last_seconds=0
to
always_keep_last_seconds=300
Or whatever amount of seconds to keep at the end


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 19 posts ]  Go to page Previous  1, 2

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group