Here you can post working ini files
Use the country name as the subject line. Do include names of broadcasters this ini works for at the top of the post. Additional ini files for the same country an be added by replying. Discussion to be done in Tuning forum.
; MAIN SETTING
detect_method=43 ; 1=black frame, 2=logo, 4=scene change, 8=fuzzy logic, 16=closed captions, 32=aspect ration, 64=silence, 128=cutscenes, 255=all
verbose=0 ; ******* 10 for testing *******
max_brightness=60
maxbright=1
test_brightness=40
max_avg_brightness=25
max_commercialbreak=600
min_commercialbreak=25
max_commercial_size=125
min_commercial_size=4
min_show_segment_length=250 ; default 250 Any block larger then this in seconds is regarded as a show block
max_volume=500
max_silence=100
non_uniformity=500
; DETAILED SETTING
min_silence=12
noise_level=5
brightness_jump=200
fps=25
validate_silence=1
validate_uniform=1
validate_scenechange=1
global_threshold=1.05
disable_heuristics=4
; CPU LOAD
hardware_decode=0
play_nice_start=-1
play_nice_end=-1
play_nice_sleep=2
thread_count=2
skip_B_frames=0
; INPUT CORRECTION
max_repair_size=200
ms_audio_delay=5
volume_slip=40
variable_bitrate=1
; ASPECT RATIO
ar_delta=0.08
cut_on_ar_change=2 ; set to 1 if you want to cut also on aspect ratio changes when logo is present, set to 2 to force cuts on aspect ratio changes. set to 0 to disable
; GLOBAL REMOVES
padding=0
remove_before=0
remove_after=0
added_recording=14
delete_show_after_last_commercial=0
delete_show_before_first_commercial=0
delete_show_before_or_after_current=0
delete_block_after_commercial=0
min_commercial_break_at_start_or_end=39
always_keep_first_seconds=0
always_keep_last_seconds=0
; USA SPECIFIC
intelligent_brightness=0
black_percentile=0.0076
uniform_percentile=0.003
score_percentile=0.71
; MAIN SCORING
length_strict_modifier=3
length_nonstrict_modifier=1.5
combined_length_strict_modifier=2
combined_length_nonstrict_modifier=1.25
ar_wrong_modifier=2
excessive_length_modifier=0.01
dark_block_modifier=0.3
min_schange_modifier=0.5
max_schange_modifier=2
logo_present_modifier=0.01
punish_no_logo=1 ; default 1 do not modify the score of a block because it has no logo
; DETAILED SCORING
punish=0
reward=0
punish_threshold=1.3
punish_modifier=2
reward_modifier=0.5
; LOGO FINDING
border=10
give_up_logo_search=2000
delay_logo_search=0
logo_max_percentage_of_screen=0.1 ; default 0.1
ticker_tape=0
ticker_tape_percentage=0
ignore_side=0
subtitles=0
logo_at_bottom=0
logo_threshold=0.65 ; a logo is searched using a logo mask. the logo threshold determines how much of the logo mask must match the video. only very clean logos can use a value of 0.9 or higher. you can see the qualtity of the logo detection in the yellow line in the debug window. the cleaner/higher the line, the better the quality, the higher you can set the threshold.
logo_percentage_threshold=0.25 ; the logo precentage threshold determines the percentage of frames in a block that must (not) have logo to be promoted/punished. a higher value is useful if logo is good and you have commercials blocks with a bit of logo.
logo_filter=0
aggressive_logo_rejection=0
edge_level_threshold=5
edge_radius=2
edge_weight=10
edge_step=1
num_logo_buffers=50
use_existing_logo_file=1 ; use logo file already created at beginning of show
two_pass_logo=1 ; when enabled the recording processing will restart when logo is found to ensure best quality logo coveage
; LOGO INTERPRETATION
connect_blocks_with_logo=1
logo_percentile=0.92
logo_fraction=0.4
shrink_logo=5 ; default 5 use this to shrink the logo so it disappears before the commercial
shrink_logo_tail=0
before_logo=0
after_logo=0
where_logo=0
min_black_frames_for_break=1
; CLOSED CAPTIONING
ccCheck=0
cc_commercial_type_modifier=4
cc_wrong_type_modifier=2
cc_correct_type_modifier=0.75
; LIVE TV
live_tv=0
live_tv_retries=4
require_div5=0
div5_tolerance=-1
incommercial_frames=1000
; OUTPUT CONTROL
output_default=1
output_chapters=0
output_plist_cutlist=0
output_zoomplayer_cutlist=0
output_zoomplayer_chapter=0
output_vcf=0
output_vdr=0
output_projectx=0
output_avisynth=0
output_videoredo=0
output_videoredo3=0
videoredo_offset=2
output_btv=0
output_edl=1
edl_offset=0
edl_skip_field=0
output_edlp=0
output_bsplayer=0
output_edlx=0
output_cuttermaran=0
output_mpeg2schnitt=0
output_womble=0
output_mls=0
output_mpgtx=0
output_dvrmstb=0
output_dvrcut=0
output_ipodchap=0
output_framearray=0 ; ******** 1 for testing ********
output_debugwindow=0 ; ******** 1 for testing ********
output_tuning=0
output_training=0
output_false=0
output_aspect=0
output_demux=0
output_data=0 ; ******** 1 for testing ********
output_srt=0
output_smi=0
output_timing=0
output_incommercial=0
delete_logo_file=1 ; ******** 0 for testing ********
; CUTSCENE PROCESSING
cutscene_frame=0
cutscene_dumpfile=""
cutscene_threshold=10
cutscenefile1=""
cutscenefile2=""
cutscenefile3=""
cutscenefile4=""
cutscenefile5=""
cutscenefile6=""
cutscenefile7=""
cutscenefile8=""
windowtitle="Comskip - %s"
cuttermaran_options="cut=\"true\" unattended=\"true\" muxResult=\"false\" snapToCutPoints=\"true\" closeApp=\"true\""
mpeg2schnitt_options="mpeg2schnitt.exe /S /E /R25 /Z %2 %1"
avisynth_options="LoadPlugin(\"MPEG2Dec3.dll\") \nMPEG2Source(\"%s\")\n"
dvrcut_options="dvrcut \"%s.dvr-ms\" \"%s_clean.dvr-ms\" "
I've been using this for the following shows and have been reasonably happy with the results. I've only had to branch off with one network and thats SYFY with different settings. I've been trying to minimize the different config files.
Grey's Anatomy*;Life in Pieces*;Heroes Reborn*;The Carbonaro Effect*;Limitless*;Minority Report*;Best Time Ever*;Blindspot*;The Soup*;Fast N' Loud*;Drunk History*;Fear The Walking Dead*;South Park*;Deadliest Catch*;American Ninja Warrior*;Forged in Fire*;The Tonight Show*;The Walking Dead*;Lip Sync Battle*;Donnie Loves Jenny*;Impastor*;Key & Peele*;Wahlburgers*;Zoo*;Pawn Stars*;Kendra on Top*;*First 48*;TMZ*;*Top Funniest*;*World's Dumbest*;Falling Skies*;The Last Ship*;Hell on Wheels*;*APHD*;Gotham*
; MAIN SETTING
detect_method=43 ; 1=black frame, 2=logo, 4=scene change, 8=fuzzy logic, 16=closed captions, 32=aspect ration, 64=silence, 128=cutscenes, 255=all
verbose=0 ; ******* 10 for testing *******
max_brightness=60
maxbright=1
test_brightness=40
max_avg_brightness=25
max_commercialbreak=600
min_commercialbreak=25
max_commercial_size=125
min_commercial_size=4
min_show_segment_length=250 ; default 250 Any block larger then this in seconds is regarded as a show block
max_volume=500
max_silence=100
non_uniformity=500
; DETAILED SETTING
min_silence=12
noise_level=5
brightness_jump=200
fps=25
validate_silence=1
validate_uniform=1
validate_scenechange=1
global_threshold=1.05
disable_heuristics=4
; CPU LOAD
hardware_decode=0
play_nice_start=-1
play_nice_end=-1
play_nice_sleep=2
thread_count=2
skip_B_frames=0
; INPUT CORRECTION
max_repair_size=200
ms_audio_delay=5
volume_slip=40
variable_bitrate=1
; ASPECT RATIO
ar_delta=0.08
cut_on_ar_change=1 ; set to 1 if you want to cut also on aspect ratio changes when logo is present, set to 2 to force cuts on aspect ratio changes. set to 0 to disable
; GLOBAL REMOVES
padding=0
remove_before=0
remove_after=0
added_recording=14
delete_show_after_last_commercial=0
delete_show_before_first_commercial=0
delete_show_before_or_after_current=0
delete_block_after_commercial=0
min_commercial_break_at_start_or_end=39
always_keep_first_seconds=0
always_keep_last_seconds=0
; USA SPECIFIC
intelligent_brightness=0
black_percentile=0.0076
uniform_percentile=0.003
score_percentile=0.71
; MAIN SCORING
length_strict_modifier=3
length_nonstrict_modifier=1.5
combined_length_strict_modifier=2
combined_length_nonstrict_modifier=1.25
ar_wrong_modifier=2
excessive_length_modifier=0.01
dark_block_modifier=0.3
min_schange_modifier=0.5
max_schange_modifier=2
logo_present_modifier=0.01
punish_no_logo=1 ; default 1 do not modify the score of a block because it has no logo
; DETAILED SCORING
punish=0
reward=0
punish_threshold=1.3
punish_modifier=2
reward_modifier=0.5
; LOGO FINDING
border=10
give_up_logo_search=2000
delay_logo_search=0
logo_max_percentage_of_screen=0.1 ; default 0.1
ticker_tape=0
ticker_tape_percentage=0
ignore_side=0
subtitles=0
logo_at_bottom=0
logo_threshold=0.75 ; a logo is searched using a logo mask. the logo threshold determines how much of the logo mask must match the video. only very clean logos can use a value of 0.9 or higher. you can see the qualtity of the logo detection in the yellow line in the debug window. the cleaner/higher the line, the better the quality, the higher you can set the threshold.
logo_percentage_threshold=0.25 ; the logo precentage threshold determines the percentage of frames in a block that must (not) have logo to be promoted/punished. a higher value is useful if logo is good and you have commercials blocks with a bit of logo.
logo_filter=0
aggressive_logo_rejection=0
edge_level_threshold=5
edge_radius=2
edge_weight=10
edge_step=1
num_logo_buffers=50
use_existing_logo_file=1 ; use logo file already created at beginning of show
two_pass_logo=1 ; when enabled the recording processing will restart when logo is found to ensure best quality logo coveage
; LOGO INTERPRETATION
connect_blocks_with_logo=1
logo_percentile=0.92
logo_fraction=0.4
shrink_logo=5 ; default 5 use this to shrink the logo so it disappears before the commercial
shrink_logo_tail=0
before_logo=5
after_logo=5
where_logo=0
min_black_frames_for_break=1
; CLOSED CAPTIONING
ccCheck=0
cc_commercial_type_modifier=4
cc_wrong_type_modifier=2
cc_correct_type_modifier=0.75
; LIVE TV
live_tv=0
live_tv_retries=4
require_div5=0
div5_tolerance=-1
incommercial_frames=1000
; OUTPUT CONTROL
output_default=1
output_chapters=0
output_plist_cutlist=0
output_zoomplayer_cutlist=0
output_zoomplayer_chapter=0
output_vcf=0
output_vdr=0
output_projectx=0
output_avisynth=0
output_videoredo=0
output_videoredo3=0
videoredo_offset=2
output_btv=0
output_edl=1
edl_offset=0
edl_skip_field=0
output_edlp=0
output_bsplayer=0
output_edlx=0
output_cuttermaran=0
output_mpeg2schnitt=0
output_womble=0
output_mls=0
output_mpgtx=0
output_dvrmstb=0
output_dvrcut=0
output_ipodchap=0
output_framearray=0 ; ******** 1 for testing ********
output_debugwindow=0 ; ******** 1 for testing ********
output_tuning=0
output_training=0
output_false=0
output_aspect=0
output_demux=0
output_data=0 ; ******** 1 for testing ********
output_srt=0
output_smi=0
output_timing=0
output_incommercial=0
delete_logo_file=1 ; ******** 0 for testing ********
; CUTSCENE PROCESSING
cutscene_frame=0
cutscene_dumpfile=""
cutscene_threshold=10
cutscenefile1=""
cutscenefile2=""
cutscenefile3=""
cutscenefile4=""
cutscenefile5=""
cutscenefile6=""
cutscenefile7=""
cutscenefile8=""
windowtitle="Comskip - %s"
cuttermaran_options="cut=\"true\" unattended=\"true\" muxResult=\"false\" snapToCutPoints=\"true\" closeApp=\"true\""
mpeg2schnitt_options="mpeg2schnitt.exe /S /E /R25 /Z %2 %1"
avisynth_options="LoadPlugin(\"MPEG2Dec3.dll\") \nMPEG2Source(\"%s\")\n"
dvrcut_options="dvrcut \"%s.dvr-ms\" \"%s_clean.dvr-ms\" "
Last edited by neIVIe515 on Sat Oct 24, 2015 11:22 am, edited 2 times in total.
; MAIN SETTING
detect_method=43 ; 1=black frame, 2=logo, 4=scene change, 8=fuzzy logic, 16=closed captions, 32=aspect ration, 64=silence, 128=cutscenes, 255=all
verbose=0 ; ******* 10 for testing *******
max_brightness=60
maxbright=1
test_brightness=40
max_avg_brightness=25
max_commercialbreak=600
min_commercialbreak=25
max_commercial_size=125
min_commercial_size=4
min_show_segment_length=250 ; default 250 Any block larger then this in seconds is regarded as a show block
max_volume=500
max_silence=100
non_uniformity=500
; DETAILED SETTING
min_silence=12
noise_level=5
brightness_jump=200
fps=25
validate_silence=1
validate_uniform=1
validate_scenechange=1
global_threshold=1.05
disable_heuristics=4
; CPU LOAD
hardware_decode=0
play_nice_start=-1
play_nice_end=-1
play_nice_sleep=2
thread_count=2
skip_B_frames=0
; INPUT CORRECTION
max_repair_size=200
ms_audio_delay=5
volume_slip=40
variable_bitrate=1
; ASPECT RATIO
ar_delta=0.08
cut_on_ar_change=2 ; set to 1 if you want to cut also on aspect ratio changes when logo is present, set to 2 to force cuts on aspect ratio changes. set to 0 to disable
; GLOBAL REMOVES
padding=0
remove_before=0
remove_after=0
added_recording=14
delete_show_after_last_commercial=0
delete_show_before_first_commercial=0
delete_show_before_or_after_current=0
delete_block_after_commercial=0
min_commercial_break_at_start_or_end=39
always_keep_first_seconds=0
always_keep_last_seconds=0
; USA SPECIFIC
intelligent_brightness=0
black_percentile=0.0076
uniform_percentile=0.003
score_percentile=0.71
; MAIN SCORING
length_strict_modifier=3
length_nonstrict_modifier=1.5
combined_length_strict_modifier=2
combined_length_nonstrict_modifier=1.25
ar_wrong_modifier=2
excessive_length_modifier=0.01
dark_block_modifier=0.3
min_schange_modifier=0.5
max_schange_modifier=2
logo_present_modifier=0.01
punish_no_logo=1 ; default 1 do not modify the score of a block because it has no logo
; DETAILED SCORING
punish=0
reward=0
punish_threshold=1.3
punish_modifier=2
reward_modifier=0.5
; LOGO FINDING
border=10
give_up_logo_search=2000
delay_logo_search=0
logo_max_percentage_of_screen=0.1 ; default 0.1
ticker_tape=0
ticker_tape_percentage=0
ignore_side=0
subtitles=0
logo_at_bottom=0
logo_threshold=0.65 ; a logo is searched using a logo mask. the logo threshold determines how much of the logo mask must match the video. only very clean logos can use a value of 0.9 or higher. you can see the qualtity of the logo detection in the yellow line in the debug window. the cleaner/higher the line, the better the quality, the higher you can set the threshold.
logo_percentage_threshold=0.25 ; the logo precentage threshold determines the percentage of frames in a block that must (not) have logo to be promoted/punished. a higher value is useful if logo is good and you have commercials blocks with a bit of logo.
logo_filter=0
aggressive_logo_rejection=0
edge_level_threshold=5
edge_radius=2
edge_weight=10
edge_step=1
num_logo_buffers=50
use_existing_logo_file=1 ; use logo file already created at beginning of show
two_pass_logo=1 ; when enabled the recording processing will restart when logo is found to ensure best quality logo coveage
; LOGO INTERPRETATION
connect_blocks_with_logo=1
logo_percentile=0.92
logo_fraction=0.4
shrink_logo=5 ; default 5 use this to shrink the logo so it disappears before the commercial
shrink_logo_tail=0
before_logo=10
after_logo=5
where_logo=0
min_black_frames_for_break=1
; CLOSED CAPTIONING
ccCheck=0
cc_commercial_type_modifier=4
cc_wrong_type_modifier=2
cc_correct_type_modifier=0.75
; LIVE TV
live_tv=0
live_tv_retries=4
require_div5=0
div5_tolerance=-1
incommercial_frames=1000
; OUTPUT CONTROL
output_default=1
output_chapters=0
output_plist_cutlist=0
output_zoomplayer_cutlist=0
output_zoomplayer_chapter=0
output_vcf=0
output_vdr=0
output_projectx=0
output_avisynth=0
output_videoredo=0
output_videoredo3=0
videoredo_offset=2
output_btv=0
output_edl=1
edl_offset=0
edl_skip_field=0
output_edlp=0
output_bsplayer=0
output_edlx=0
output_cuttermaran=0
output_mpeg2schnitt=0
output_womble=0
output_mls=0
output_mpgtx=0
output_dvrmstb=0
output_dvrcut=0
output_ipodchap=0
output_framearray=0 ; ******** 1 for testing ********
output_debugwindow=0 ; ******** 1 for testing ********
output_tuning=0
output_training=0
output_false=0
output_aspect=0
output_demux=0
output_data=0 ; ******** 1 for testing ********
output_srt=0
output_smi=0
output_timing=0
output_incommercial=0
delete_logo_file=1 ; ******** 0 for testing ********
; CUTSCENE PROCESSING
cutscene_frame=0
cutscene_dumpfile=""
cutscene_threshold=10
cutscenefile1=""
cutscenefile2=""
cutscenefile3=""
cutscenefile4=""
cutscenefile5=""
cutscenefile6=""
cutscenefile7=""
cutscenefile8=""
windowtitle="Comskip - %s"
cuttermaran_options="cut=\"true\" unattended=\"true\" muxResult=\"false\" snapToCutPoints=\"true\" closeApp=\"true\""
mpeg2schnitt_options="mpeg2schnitt.exe /S /E /R25 /Z %2 %1"
avisynth_options="LoadPlugin(\"MPEG2Dec3.dll\") \nMPEG2Source(\"%s\")\n"
dvrcut_options="dvrcut \"%s.dvr-ms\" \"%s_clean.dvr-ms\" "
neIVIe515 wrote:Update on my GENERAL config used with MCEBuddy.
I've been using this for the following shows and have been reasonably happy with the results. I've only had to branch off with one network and thats SYFY with different settings. I've been trying to minimize the different config files.
Scream Queens*;Limitless*;Minority Report*;Best Time Ever*;Blindspot*;The Soup*;Fast N' Loud*;Drunk History*;Fear The Walking Dead*;South Park*;Deadliest Catch*;American Ninja Warrior*;Forged in Fire*;The Tonight Show*;The Walking Dead*;Lip Sync Battle*;Donnie Loves Jenny*;Impastor*;Key & Peele*;Wahlburgers*;Zoo*;Pawn Stars*;Kendra on Top*;*First 48*;TMZ*;*Top Funniest*;*World's Dumbest*;Falling Skies*;The Last Ship*;Hell on Wheels*;*APHD*;Gotham*
You can add "The Middle" to this list. Works very well for me. My only problem was a slight over cut at the very beginning, but nothing too bad.
I've been playing with that as well or at least the last two episodes s07e01 and s07e02.
After testing these two episode I found these settings better. I'm not a fan on config file per show because it gets to be an issue in MCEBuddy keeping things minimal and organized. Doesn't appear that is going to be the case.
; MAIN SETTING
detect_method=43 ; 1=black frame, 2=logo, 4=scene change, 8=fuzzy logic, 16=closed captions, 32=aspect ration, 64=silence, 128=cutscenes, 255=all
verbose=0 ; ******* 10 for testing *******
max_brightness=60
maxbright=1
test_brightness=40
max_avg_brightness=25
max_commercialbreak=600
min_commercialbreak=25
max_commercial_size=155
min_commercial_size=4
min_show_segment_length=126 ; default 250 Any block larger then this in seconds is regarded as a show block
max_volume=500
max_silence=100
non_uniformity=500
; DETAILED SETTING
min_silence=12
noise_level=5
brightness_jump=200
fps=25
validate_silence=1
validate_uniform=1
validate_scenechange=1
global_threshold=1.05
disable_heuristics=4
; CPU LOAD
hardware_decode=0
play_nice_start=-1
play_nice_end=-1
play_nice_sleep=2
thread_count=2
skip_B_frames=0
; INPUT CORRECTION
max_repair_size=200
ms_audio_delay=5
volume_slip=40
variable_bitrate=1
; ASPECT RATIO
ar_delta=0.08
cut_on_ar_change=1 ; set to 1 if you want to cut also on aspect ratio changes when logo is present, set to 2 to force cuts on aspect ratio changes. set to 0 to disable
; GLOBAL REMOVES
padding=0
remove_before=0
remove_after=0
added_recording=14
delete_show_after_last_commercial=0
delete_show_before_first_commercial=0
delete_show_before_or_after_current=0
delete_block_after_commercial=0
min_commercial_break_at_start_or_end=39
always_keep_first_seconds=0
always_keep_last_seconds=100
; USA SPECIFIC
intelligent_brightness=0
black_percentile=0.0076
uniform_percentile=0.003
score_percentile=0.71
; MAIN SCORING
length_strict_modifier=3
length_nonstrict_modifier=1.5
combined_length_strict_modifier=2
combined_length_nonstrict_modifier=1.25
ar_wrong_modifier=2
excessive_length_modifier=0.01
dark_block_modifier=0.3
min_schange_modifier=0.5
max_schange_modifier=2
logo_present_modifier=0.01
punish_no_logo=1 ; default 1 do not modify the score of a block because it has no logo
; DETAILED SCORING
punish=0
reward=0
punish_threshold=1.3
punish_modifier=2
reward_modifier=0.5
; LOGO FINDING
border=10
give_up_logo_search=2000
delay_logo_search=0
logo_max_percentage_of_screen=0.1 ; default 0.1
ticker_tape=0
ticker_tape_percentage=0
ignore_side=0
subtitles=0
logo_at_bottom=0
logo_threshold=0.75 ; a logo is searched using a logo mask. the logo threshold determines how much of the logo mask must match the video. only very clean logos can use a value of 0.9 or higher. you can see the qualtity of the logo detection in the yellow line in the debug window. the cleaner/higher the line, the better the quality, the higher you can set the threshold.
logo_percentage_threshold=0.25 ; the logo precentage threshold determines the percentage of frames in a block that must (not) have logo to be promoted/punished. a higher value is useful if logo is good and you have commercials blocks with a bit of logo.
logo_filter=0
aggressive_logo_rejection=0
edge_level_threshold=5
edge_radius=2
edge_weight=10
edge_step=1
num_logo_buffers=50
use_existing_logo_file=1 ; use logo file already created at beginning of show
two_pass_logo=1 ; when enabled the recording processing will restart when logo is found to ensure best quality logo coveage
; LOGO INTERPRETATION
connect_blocks_with_logo=1
logo_percentile=0.92
logo_fraction=0.4
shrink_logo=5 ; default 5 use this to shrink the logo so it disappears before the commercial
shrink_logo_tail=0
before_logo=5
after_logo=5
where_logo=0
min_black_frames_for_break=1
; CLOSED CAPTIONING
ccCheck=0
cc_commercial_type_modifier=4
cc_wrong_type_modifier=2
cc_correct_type_modifier=0.75
; LIVE TV
live_tv=0
live_tv_retries=4
require_div5=0
div5_tolerance=-1
incommercial_frames=1000
; OUTPUT CONTROL
output_default=1
output_chapters=0
output_plist_cutlist=0
output_zoomplayer_cutlist=0
output_zoomplayer_chapter=0
output_vcf=0
output_vdr=0
output_projectx=0
output_avisynth=0
output_videoredo=0
output_videoredo3=0
videoredo_offset=2
output_btv=0
output_edl=1
edl_offset=0
edl_skip_field=0
output_edlp=0
output_bsplayer=0
output_edlx=0
output_cuttermaran=0
output_mpeg2schnitt=0
output_womble=0
output_mls=0
output_mpgtx=0
output_dvrmstb=0
output_dvrcut=0
output_ipodchap=0
output_framearray=0 ; ******** 1 for testing ********
output_debugwindow=0 ; ******** 1 for testing ********
output_tuning=0
output_training=0
output_false=0
output_aspect=0
output_demux=0
output_data=0 ; ******** 1 for testing ********
output_srt=0
output_smi=0
output_timing=0
output_incommercial=0
delete_logo_file=1 ; ******** 0 for testing ********
; CUTSCENE PROCESSING
cutscene_frame=0
cutscene_dumpfile=""
cutscene_threshold=10
cutscenefile1=""
cutscenefile2=""
cutscenefile3=""
cutscenefile4=""
cutscenefile5=""
cutscenefile6=""
cutscenefile7=""
cutscenefile8=""
windowtitle="Comskip - %s"
cuttermaran_options="cut=\"true\" unattended=\"true\" muxResult=\"false\" snapToCutPoints=\"true\" closeApp=\"true\""
mpeg2schnitt_options="mpeg2schnitt.exe /S /E /R25 /Z %2 %1"
avisynth_options="LoadPlugin(\"MPEG2Dec3.dll\") \nMPEG2Source(\"%s\")\n"
dvrcut_options="dvrcut \"%s.dvr-ms\" \"%s_clean.dvr-ms\" "
Thank you neIVIe515. I got to tell you; you are pretty darn good at this. I get so lost when trying to get the settings correct, so needless to say your work is much appreciated.