Comskip Support Forum

United States - Comcast HDTV
Page 1 of 1

Author:  stvs [ Thu Nov 05, 2015 3:31 am ]
Post subject:  United States - Comcast HDTV

Here's the .ini we use for etv-comskip,,

; See comskip.txt in the distribution zip file for many settable parameters, read manual.html, tuning.html and debugwindow.html for how to tune and debug comskip
detect_method=127         ;1=black frame, 2=logo, 4=scene change, 8=fuzzy logic, 16=closed captions, 32=aspect ration, 64=silence, 128=cutscenes, 255=all
validate_silence=1         ; Default, set to 0 to force using this clues if selected above.
validate_uniform=1         ; Default, set to 0 to force using this clues (like pure white frames) if blackframe is selected above.
validate_scenechange=1      ; Default, set to 0 to force using this clues if selected above.
verbose=10            ;show a lot of extra info, level 5 is also OK, set to 0 to disable
max_brightness=60               ;frame not black if any pixels checked are greater than this (scale 0 to 255)
test_brightness=40            ;frame not pure black if any pixels checked are greater than this, will check average brightness (scale 0 to 255)
max_avg_brightness=25         ;maximum average brightness for a dim frame to be considered black (scale 0 to 255) 0 means autosetting
max_commercialbreak=600       ;maximum length in seconds to consider a segment a commercial break
min_commercialbreak=25         ;minimum length in seconds to consider a segment a commercial break
max_commercial_size=125         ;maximum time in seconds for a single commercial or multiple commercials if no breaks in between
min_commercial_size=4         ;mimimum time in seconds for a single commercial
min_show_segment_length=250    ; any segment longer than this will be scored towards show.
non_uniformity=500         ; Set to 0 to disable cutpoints based on uniform frames
max_volume=500            ; any frame with sound volume larger than this will not be regarded as black frame
min_silence=12            ; Any deep silence longer than this amount  of frames is a possible cutpoint
ticker_tape=0            ; Amount of pixels from bottom to ignore in all processing
logo_at_bottom=1         ; Set to 1 to search only for logo at the lower half of the video, do not combine with subtitle setting
punish=0               ; Compare to average for sum of 1=brightness, 2=uniform 4=volume, 8=silence, 16=schange, set to 0 to disable
punish_threshold=1.3      ; Multiply when amount is above average * punish_threshold
punish_modifier=2         ; When above average * threshold multiply score by this value
intelligent_brightness=1       ; Set to 1 to use a USA specific algorithm to tune some of the settings, not adviced outside the USA
logo_percentile=0.92         ; if more then this amount of logo is found then logo detection will be disabled
punish_no_logo=1         ; Default, set to 0 to avoid show segments without logo to be scored towards commercial
connect_blocks_with_logo=1      ; set to 1 if you want successive blocks with logo on the transition to be regarded as connected, set to 0 to disable
logo_filter=0               ; set the size of the filter to apply to bad logo detection, 4 seems to be a good value.
cut_on_ar_change=1         ; set to 1 if you want to cut also on aspect ratio changes when logo is present, set to 2 to force cuts on aspect ratio changes. set to 0 to disable
delete_show_after_last_commercial=0   ; set to 1 if you want to delete the last block if its a show and after a commercial
delete_show_before_or_after_current=0   ; set to 1 if you want to delete the previous and the next show in the recording, this can lead to the deletion of trailers of next show
delete_block_after_commercial=0   ;set to max size of block in seconds to be discarded, set to 0 to disable
remove_before=0            ; amount of seconds of show to be removed before ALL commercials
remove_after=0            ; amount of seconds of show to be removed after ALL commercials
shrink_logo=5            ; Reduce the duration of the logo with this amount of seconds
after_logo=0      ; set to number of seconds after logo disappears comskip should start to search for silence to insert an additional cutpoint
skip_b_frames=0            ; Set to 1 to force Comskip to skip frames for higher processing speed.
max_repair_size=200         ; Will repair maximum 200 missing MPEG frames in the timeline, set to 0 to disable repairing for players that don't use PTS.
disable_heuristics=4      bit pattern for disabling heuristics, adding 1 disables heristics 1, adding 2 disables heristics 2, adding 4 disables heristics 3, 255  disables all heuristics
delete_logo_file=0         ; set to 1 if you want comskip to tidy up after finishing
output_framearray=0         ; create a big excel file for detailed analysis, set to 0 to disable
output_data=0            ; create a dump of the user data channel, used for CC and XDS (such as V-Chip info). Can be use together with output_framearray to remote debug CC decoding
output_videoredo=0         ; The old videoredo format
output_videoredo3=0         ; The new videoredo v3 format.
output_mls=0         ; set to 1 if you want MPeg Video Wizard bookmark file output
output_dvrmstb=0         ; Set to 1 if you're running DVRMS-Toolbox
output_btv=0            ; set to 1 if you want Beyond TV chapter cutlist output
output_projectx=0         ; set to 1 if you want ProjectX cutlist output (Xcl)
output_vdr=0            ; set to 1 if you want XBMC to skipping commercials
output_demux=0            ; set to 1 if you want comskip to demux the mpeg file while scanning
live_tv=0               ; set to 1 if you use parallelprocessing and need the output while recording
live_tv_retries=0         ; change to 16 when using live_tv in BTV, used for mpeg PS and TS
dvrms_live_tv_retries=0         ; only used for dvr_ms
standoff=0               ; change to 8000000 when using live_tv in BTV
cuttermaran_options="cut=\"true\" unattended=\"true\" muxResult=\"false\" snapToCutPoints=\"true\" closeApp=\"true\""
mpeg2schnitt_options="mpeg2schnitt.exe /S /E /R25  /Z %2 %1"
avisynth_options="LoadPlugin(\"MPEG2Dec3.dll\") \nMPEG2Source(\"%s\")\n"
dvrcut_options="dvrcut \"\" \"\" "
windowtitle="Comskip - %s"
thread_count=4            ; multi-threaded processing

Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group