I've just tried the latest version and unfortunately it stops reading my testfile just after it starts the second pass once the logo is found. This is with my MPEG2 > H264 converted files using videoredo.
It works OK on an off air H264/AAC-LATM 1080i test file although the progress says 0% all the way through and thread_count=2, and thread_count=4 doesn't seem to change the CPU usage and FPS.
comskipgui and comskip are dated 13/11/11 16:02
81.018 crash after logo
Re: 81.018 crash after logo
Sorry to ask this......
Did you check comskip version number in the log file?
Did you check comskip version number in the log file?
Re: 81.018 crash after logo
I was going by the file date
but from the logfile
Generated using Comskip 0.81.018
and from further down in case it's useful
******************* End of Logo Processing ***************
Audio PTS jumped -8798 frames at frame 1
Parsed 4 video frames and 1 audio frames of 25.00 fps
Maximum Volume found is 6400
Finished scanning file. Starting to build Commercial List.
and at the very bottom
3 Frames Processed
but from the logfile
Generated using Comskip 0.81.018
and from further down in case it's useful
******************* End of Logo Processing ***************
Audio PTS jumped -8798 frames at frame 1
Parsed 4 video frames and 1 audio frames of 25.00 fps
Maximum Volume found is 6400
Finished scanning file. Starting to build Commercial List.
and at the very bottom
3 Frames Processed
Re: 81.018 crash after logo
That is indeed bad news.
More problems with seeking to solve with the new decoder.......
More problems with seeking to solve with the new decoder.......
Re: 81.018 crash after logo
Forgot to mention
As a workaround you can set
two_pass_logo=0
As a workaround you can set
two_pass_logo=0
Re: 81.018 crash after logo
With that file there wouldn't be much left to scan once it's found the logo.
I'll stick with my current setup for now but it's superb progress and I'll test the next release.
Thanks!
I'll stick with my current setup for now but it's superb progress and I'll test the next release.
Thanks!
Re: 81.018 crash after logo
Should be solved in build 0.81.019
Re: 81.018 crash after logo
Works well, although the thread_count parameter seems to not make any difference to the CPU usage. Should I post this to a separate thread?
Re: 81.018 crash after logo
Strange.
On my CPU (i5) it move the load from 25% (when running one instance of comskip) to 50% implying it fully loads the two threads of one core.
Multi threaded decoding on SD does not add a lot of speed. Works best on HD.
On my CPU (i5) it move the load from 25% (when running one instance of comskip) to 50% implying it fully loads the two threads of one core.
Multi threaded decoding on SD does not add a lot of speed. Works best on HD.