hardware acceleration blues
Re: hardware acceleration blues
I uploaded 0.81.088 beta to the donators area
Can you test if there is any speed difference when you enable HW acceleration
For mpeg2 its most probably slower
Can you test if there is any speed difference when you enable HW acceleration
For mpeg2 its most probably slower
-
- Posts: 38
- Joined: Fri Aug 21, 2015 3:43 am
Re: hardware acceleration blues
i just downloaded it. I should have a result for you in about 30 min. I removed the thread_count option from my comskip.ini file. thanks
-
- Posts: 38
- Joined: Fri Aug 21, 2015 3:43 am
Re: hardware acceleration blues
well you are almost there. It works if I drag and drop the wtv file on to comskip.exe but not when called from mcebuddy. please note I am using mcebuddy version 2.4.2 thanks
Re: hardware acceleration blues
Can you set
verbose=10
in comskip.ini and check if the hardware_decode parameter is set to 1
verbose=10
in comskip.ini and check if the hardware_decode parameter is set to 1
-
- Posts: 38
- Joined: Fri Aug 21, 2015 3:43 am
Re: hardware acceleration blues
they were already set thanks
Re: hardware acceleration blues
Strange, so no difference when run from mcebuddy
Can you check the comskip version number in the log file to see if you run the right build?
Can you check the comskip version number in the log file to see if you run the right build?
-
- Posts: 38
- Joined: Fri Aug 21, 2015 3:43 am
Re: hardware acceleration blues
according to the mcebuddy log version 0.81.088 was used with these arguments: --ini="C:\comskip\comskip.ini" --output="E:\mcebuddy temp\working0" "E:\mcebuddy temp\working0\Good Day New York-2015-09-07 0909.wtv". the comskip.exe file is also in c:\comskip. thanks
Re: hardware acceleration blues
Can you do a manual run and a run from mcebuddy and compare the two log files?
-
- Posts: 38
- Joined: Fri Aug 21, 2015 3:43 am
Re: hardware acceleration blues
the manual log is much larger. I just sent you an email with both of them.
Re: hardware acceleration blues
There is a huge unexpected difference between the decoded video of the manual run and the mcebuddy run.The file processing from within mcebuddy has a very different black level. Is there any postprocessing done by mcebuddy?
Can you disable the hardware decoding and see if there is any difference between running from mcebuddy and running manually?
Can you disable the hardware decoding and see if there is any difference between running from mcebuddy and running manually?
-
- Posts: 38
- Joined: Fri Aug 21, 2015 3:43 am
Re: hardware acceleration blues
I copied the file before mcebuddy ran so no post processing was done. I will try it with changing both lowres=0 and disabling hardware acceleration. on different runs thanks
Re: hardware acceleration blues
i will ask the developper of mcebuddy for an explanation
-
- Posts: 38
- Joined: Fri Aug 21, 2015 3:43 am
Re: hardware acceleration blues
I just sent you a email with the logs